User Manual

70/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
• Copying files
• Deleting files
3.6.4 Files from the memory card
The central units store certain data on the memory card in the central unit. This works
only with formated memory cards.
OZW775:
File transfer from the memory card is not supported by this type of central unit.
OCI600, OZW10:
After starting the "File transfer" application, the left half of the window provides the
following directories:
• Files on the memory card
• Files directly from the central unit
Make certain you have established a connection to the plant. Use the left mouse
button to click on the directory Files directly from central unit. The right half of the
window shows all files contained in the central unit:
• The directory is automatically uploaded when starting the application if, at that
time, a connection to the central unit exists
• The directory is automatically uploaded if the application has already been started,
in which case a connection to the central unit is established
• You can again upload the directory at any time by using the right mouse button
and clicking on Files directly from central unit and then selecting Upload
directory
After the files are listed in the right half of the window, you can copy copy files with
the help of an Editor or delete files.
The OCI600 stores the following files on the memory card:
• *.TRN: All files having the extension .TRN may neither be deleted nor
overwritten! In these files, the OCI600 stores information that you
can access with the "Offline trend" application. For this reason, it
makes no sense to copy these files to the PC by means of file
transfer.
• *.SMO: All files having the extension .SMO may neither be deleted nor
overwritten! In these files, the OCI600 stores information that you
can access with the "Offline trend" application. For this reason, it
makes no sense to copy these files to the PC by means of file
transfer.
The OZW10 stores the following files on the memory card:
• OZW_xyz.BIL: The OZW10 stores all billing-related data on the memory card
when pressing the FILE button. First, the OZW… 001.BIL file will
be created. Each time the FILE button is pressed, a new file is
created whereby consecutive file name numbers (002, 003, 004,
etc.) will be assigned. This readout mode is normally used when
the central unit has not been equipped for remote readout. On the
memory card, the billing data of several central units can be
collected in order to read them on a local central unit.
For more information, refer to the following chapters:
From memory card