User Manual

71/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
• Files directly from the central unit
• Formating memory cards
• Copying and opening files
• Copying files
• Deleting files
• The "Offline trend" application
3.6.5 Formating memory cards
To enable central units to download data to the memory card, the memory card must
be formated. This concerns files the central units load down to the memory card and
information and logged values relating to the offline trend.
OZW775:
Formating memory cards is not supported by this type of central unit.
OCI600, OZW10:
After starting the "File transfer" application, the left half of the window provides the
following directories:
• Files on the memory card
• Files directly from the central unit
Make certain you have established a connection to the plant. Use the left mouse
button to click on directory Files directly from central unit. The right half of the
window shows all files contained in the central unit:
• The directory is automatically uploaded when starting the application if, at that time,
a connection to the central unit exists
• The directory is automatically uploaded if the application has already been started,
in which case a connection to the central unit is established
• You can again upload the directory at any time by using the right mouse button and
clicking on Files directly from central unit and then selecting Upload directory.
The right half of the window shows all files contained in the central unit. Use the
right mouse button to click on Files on memory card and select Format. You will
be asked if you really want to format the memory card. During formating, all files on
the memory card will be deleted. Prior to formating, check to see if an offline trend
is active and stop the offline trend before formating.
For more information, refer to the following chapters:
• Files directly from the central unit
• Files on the memory card
• Copying and opening files
• Copying files
• Deleting files
• The "Offline trend" application
3.6.6 Copying and opening files
You can transfer the files of the central unit or memory card to the PC and open the
the files with a configurable program. You configure the program to be started after
transfer on the "Tools" menu – Options...: The Options dialog appears. Under File
transfer in the File editor field, select the program you want to start (e.g. Microsoft
Excel).
Formating memory card