User Manual

75/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
Window Parameter set properties is opened. In that window, enter the name of
the parameter set. Confirm your entry by clicking the OK button.
B. To copy and paste an existing parameter set, select in the left window the
parameter set you want to copy and change (e.g. a standard parameter set or a
parameter set of some other device of the same type). Press the left mouse
button, hold it down and drag the parameter set to the device to which you want
to transfer the new parameter set. Then, release the left mouse button. If the
parameter set does not match the device (different types of devices), you cannot
transfer the parameter set to that particular device.
C. To adopt a parameter set from some other plant or PC, select in the left window
the device whose parameter set you want to import. Use the right mouse button
to click on the selected device and select Import from.... Dialog Open export file
appears. Select the required export file based on the name of the original
parameter set or the file name of the export file. The program checks if the
parameter set to be imported matches the type of selected device. If the
parameter set cannot be imported to that device, an appropriate message will
appear.
To export a parameter set, select in the left window the parameter set to be
exported. All user-defined parameter sets (blue) can be exported. Use the right
mouse button to click on the selected parameter set and select Export to.... The
Save As dialog appears. Select where the parameter set shall be exported to.
The new parameter set is now filed in the directory of the selected device. In the left
window, select the newly generated parameter set in order to check it.
You can now further edit the new parameter set:
• Adapting a parameter set
• Uploading a parameter set
• Downloading a parameter set
• Comparing parameter sets
To delete a parameter set, select in the left window the relevant parameter set. Use
the right mouse button to click on the selected parameter set and select Delete.
For more information, refer to the following chapters:
• Adapting a parameter set
• Uploading a parameter set
• Downloading a parameter set
• Comparing parameter sets
• Printing in the parameter settings
• External editing of the parameter set
3.7.4 Adapting a parameter set
When adapting a parameter set, select:
• The data points that constitute part of the parameter set. Only the selected data
points are actually downloaded to or uploaded by the device
• The values to be assigned to the selected data points
Parameter sets can be adapted offline (with no connection to a device). It is thus
possible to produce parameter sets in the office, for example, to be downloaded to the
device in the plant at a later point in time.
In the left half of the window, select the parameter set you want to adapt. Click on + / -
to the left of the parameter set to open or close it. When the parameter set is opened,
a number of pages appear showing the data points of the parameter set. When
Copy
A
dopt
Delete