User Manual

77/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
This function is very useful in connection with time switch programs, for example.
The change only produces a change of the value in the parameter set. The value
is not yet downloaded to the device. This takes place only when downloading the
parameter set.
C. To adopt the value from the device in the plant, you can use uploading the
parameter set.
D. Certain data points can only be changed together with other data points. The
existence or setting ranges of such data points can be dependent on other data
points. If you want to change such a value in the parameter set, the ACS uses a
Wizard to guide you through all parameters that need to be entered.
Ensure that the data point is part of the parameer set (must be selected) if it shall be
included when downloading or uploading the parameter set.
For more information, refer to the following chapters:
• Creating a new parameter set
• Uploading a parameter set
• Downloading a parameter set
• Comparing parameter sets
• Printing in the parameter settings
• External editing of the parameter set
3.7.5 Uploading a parameter set
If you wish, you can upload the values of a device to a user-defined parameter set.
Only values of user-defined parameter sets can be changed. The data points of
standard parameter sets always have the default values as supplied. Uploaded are
the values of all data points that constitute part of the parameter set. For information
about the selection of data points that constitute part of the parameter set, refer to
chapter Adapting a parameter set.
Use the right mouse button to click on the parameter set you want to upload from the
device and select Upload parameter set.... The Transmission window appears,
which shows the progress when uploading data points. In the left half of the window,
the program automatically jumps from one page to the next and, in the right half of the
window, from one data point, which constitues part of the parameter set, to the next.
For each data point uploaded, the Transmission result column shows whether
transmission of the value was successful.
For more information, refer to the following chapters:
• Creating a new parameter set
• Adapting a parameter set
• Downloading a parameter set
• Comparing parameter sets
• Printing in the parameter settings
• External editing of the parameter set
3.7.6 Downloading a parameter set
If you wish, you can download the values of a parameter set to a device. The data
points of standard parameter sets always have the default values as supplied.
Downloaded are the values of all data points that constitute part of the parameter set.
For information about the selection of data points that constitute part of the parameter
set, refer to chapter Adapting a parameter set.
Upload
Upload parameter set