User Manual

8/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 1 Introduction Dec. 1, 2005
• Parameter settings: Reading and editing the setting parame ters of a device in
tabular form
• Commissioning report: Logging the setting values of individual devices, device
groups or the entire plant
If this is the first time you work with the ACS Operating or ACS Service software, we
recommend you to proceed with chapter The first steps.
1.2 System requirements
PC component Minimum requirements
Processor Pentium-compatible
300 MHz, recommended 600 MHz
RAM 128 MB
Recommended 128 MB
Hard disk 1.9 GB available memory (Windows XP)
2 GB with 1 GB available memory (Windows 2000)
Recommended: Additional 20 MB available memory
per plant
Screen VGA standard driver 800 x 600, 256 colors
Recommended: SVGA standard driver 1028 x 768
Ports USB 1.1 and higher or
Serial COM, up to 19,200 Baud (either directly or
via modem)
Parallel port for copy protection
Operating system Windows XP, service pack 1
Windows 2000, service pack 3
Diskette drive 3½", 1.44 MB, for diskette with license file
CD-ROM or DVD drive
1.3 Languages
When starting the ACS..., you can select the language you wish to use. You can also
decide whether or not you want to see the dialog for selecting the language each time
the program is started up.
If the Language / Sprache window does not appear when starting up the ACS…,
select the "Tools" menu – Language selection on startup. In that case, when
closing the ACS… and starting up again, the dialog for selecting the language will
appear again.
1.4 Installing the software
The procedure for installing the ACS7… software package is described in the ACS7…
Installation Instructions, which are included in the package with the CD.
For information about commissioning the software, refer to chapter The first steps.
System requirements
Language
Installation