User Manual

82/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
3.8.3 Creating / changing a commissioning definition
A commissioning definition defines the devices in the plant that shall constitute part of
the commissioning report. Several commissioning reports can be created for a
commissioning definition, typically at different points in time after changes have been
made to the plant or to plant sections. During the creation of the commissioning
report, the values of all devices selected in the commissioning definition will be
uploaded and stored. The stored data can be accessed at any time. At a later point in
time, a commissioning report for the same commissioning definition with the same
devices can be started again.
Procedure:
A. To create a new commissioning definition, select from the "Commissioning report"
application in the left window the uppermost directory (plant name). Position the
onscreen pointer in the right window of the application and press the right mouse
button. A menu is opened. Select New – Commissioning definition.... Window
Commissioning definition properties is opened. Under General, enter a name
for the commissioning definition that describes the plant section as accurately as
possible. Confirm the entries by clicking the OK button.
B. To copy and paste an existing commissioning definition, select in the left window
the commissioning definition you want to copy and change. Press the left mouse
button, hold it down and drag the commissioning definition to the uppermost
directory (plant name). Then, release the left mouse button.
To change the name of the commissioning definition, select in the left window the
commissioning definition you want to change. Use the right mouse button to click on
the selected commissioning definition and select Properties.... Window
Commissioning definition properties, where you can change the name, is opened.
Now, you can start selecting devices for the commissioning report.
To delete a commissioning definition, select in the left window the relevant
commissioning definition. Use the right mouse button to click on the selected
commissioning definition and select Delete. Caution: All commissioning reports
uploaded for the commissioning report will also be deleted.
For more information, refer to the following chapters:
• Selecting devices for the commissioning report
• Creating the commissioning report, uploading values
• Evaluating commissioning reports
• Printing commissioning reports
• External editing of commissioning reports
3.8.4 Selecting devices for the commissioning report
In the left half of the window, select the commissioning definition for which you want to
select devices and for which a commissioning report shall be generated.
Position the onscreen pointer in the right half of the window and select New –
Device.... Window Device selection is opened. Here, you can select the devices for
which a commissioning report shall be generated. To select several devices
simultaneously:
• Use the left mouse button to click on the first of several successive devices. Press
the Shift key and hold it down. Now, use the left mouse button to click on the last
device you wan to select. The required devices are thus highlighted
Commissioning definition
New commissioning
definition
Copy
Change
Delete
Selecting devices