User Manual

83/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
• Keep the Ctrl key depressed and select all required devices with the help of the left
mouse button. Each device that is clicked will be highlighted
To add the highlighted devices to the commissioning definition, select Add. After
selection, select Close to return to the Commissioning report window. In the right
half of that window, you will find all devices that have been added.
The same device may be present in several commissioning definitions. And the same
device is shown in several columns that provide information about the type of device,
bus address, identification of the device and manufacturer number. It is possible to
sort by the individual columns.
To remove a device from the commissioning definition, select in the right half of the
Commissioning report window the relevant device (multiple selections as described
above are possible). Use the right mouse button to click on the selected device and
select Delete.
Now, you can create commissioning reports for the selected devices.
For more information, refer to the following chapters:
• Creating / changing a commissioning definition
• Creating a commissioning report, uploading values
• Evaluating commissioning reports
• Printing commissioning reports
• External editing of commissioning reports
3.8.5 Creating a commissioning report, uploading values
When creating the commissioning definition, it was defined which devices shall
constitute part of the commissioning report.
During the creation of the commissioning report, the values of all devices selected in
the commissioning definition are uploaded and stored.
In the left half of the window, select the commissioning definition for which you want to
create a commissioning report. In the right half of the window, the selected devices
are shown.
Position the onscreen pointer in the right half of the window. Press the right mouse
button and select New – Commissioning report.... Now, the Transmission window
appears, which shows the progress while uploading the data points. In the left half of
the window, the program automatically jumps from one device that constitutes part of
the commissioning definition to the next and from page to page and, in the right half of
the window, from one data point to the next. The column No. is color-coded showing
the data points that have already been uploaded:
• Black: The value of the data point has already been uploaded
• Red: The value of the data point has not yet been uploaded
After the commissioning values are uploaded, you can start evaluating the
commissioning report.
For more information, refer to the following chapters:
• Creating / changing a commissioning definition
• Selecting devices for the commissioning report
• Evaluating commissioning reports
• Printing commissioning reports
• External editing of commissioning reports
Remove
Creating a commissioning
report