User Manual

88/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 4 Menus Dec. 1, 2005
program that is capable of editing the exported data:
y External editing of Popcard
y External editing of online trend logging
y External editing of offline trend logging
y External editing of the parameter set
y External editing of commissioning reports
• Export to...: In certain applications, it is possible to export parts to some other plant
or PC:
y Creating a new plant diagram
y Creating a new Popcard
y Generating a new parameter set
• Import from...: To import the exported data: Refer to Export to...
• Plant properties...: To change the plant properties (settings for the plant that is
open) – Plant properties
• Refresh device list: To upload all information of the devices installed in the plant –
Updating a device list
• Refresh reference data points: To upload the reference data points that have an
impact on the structure of the presented Popcards and the standard plant diagrams
shown
• Edit device list...: To manually enter devices on plants using OCI700 and OZW10
– Edit device list
• Edit plant...: To create and change the user-defined plant view – Editing a plant
view
• Connection on: To establish a connection to the plant – Establishing a connection
to the plant
You can also establish a connection to the plant with the following button:
• Connection off: To abort a connection to the plant – Aborting a connection to the
plant
You can also abort the connection to the plant with the following button:
• Exit: The ACS... application is closed
• At the end of the menu, the program shows you the last 4 plants that have been
opened. You can open the required plant – Open plant
4.4 The "Edit" menu
The Edit menu contains the following menu items:
• Cut: Adds the selected objects to the clipboard.
For this command, you can also use the following button:
• Copy: Copies the selected objects to the clipboard that you can insert at the
required location using the Paste command.
For this command, you can also use the following button:
• Paste: Inserts the copied or cut objects into the selected location.
For this command, you can also use the following button:
Edit menu