User Manual

89/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 4 Menus Dec. 1, 2005
4.5 The "View" menu
The View menu contains the following menu items:
• Device view: For changing from the plant view to the device view. It is always only
one of the two views that is active at a time. The selection is made for all
applications and dialogs of the ACS...
Navigating with a device view
• Plant view: For changing from the device view to the plant view. It is always only
one of the two views that is active at a time. The selection is made for all
applications and dialogs of the ACS...
Navigating with a plant view
• Filter: Here, you can select the data points that shall be displayed. By clicking the
individual filters, the data points will be selected / deselected. The data points
displayed are only those that correspond to the selected filters. The filters are only
valid for the active window
• All: When clicking, the entire filter will be selected / deselected
• Overview: Only data points that give an overview
• Configuration: Only data points that appear in the parameter settings
• Setpoints: Only data points that define the control
• Control parameter: Only data points that have an impact on the control
behavior
• Diagnosis: Only data points that are required for diagnosing the control
behavior
• I/O modules: Only data points that represent the value of inputs or outputs
of the devices
• End user: Only data points that the enduser can access on the controller
• Commissioning report: Only data points that appear in the
commissioning report
• Consider dependencies: Selected in the default setting. If this menu item is not
selected, the pages, sections and data points that are dependent on the reference
data points will also be displayed. This application is only available when the
window is active
• Tool bar: Shows and hides the ACS... tool bar
• Status bar: Shows and hides the ACS... status bar
4.6 The "Applications" menu
The Applications menu contains the following menu items:
• Plant diagram:
Visualization and remote operation of data points with plant graphic.
• Popcard:
Visualization and remote operation of all transmitted data points of the connected
devices.
• Online trend:
Acquisition and presentation of the dynamic behavior of selected data points with
connection to the plant.
• Offline trend:
Acquisition and presentation of the dynamic behavior of selected data points with
no connection to the plant.
View menu
A
pplications menu