User Manual

95/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 5 Tips and tricks Dec. 1, 2005
The switching points are to be entered graphically. First, select the weekday whose
program you want to change.
Add switch point:
• You can add a switching point by double-clicking on the required level and the
required time
Move switch point:
• To move a switching point, select the relevant switching point with the left mouse
button and place it at the required location
Delete switch point:
• You can delete an individual switching point by selecting it with the right mouse
button and then selecting it from the Delete switch point menu
• You can delete all switching points of a weekday by clicking on Delete all switch
points with the right mouse button or by selecting Cut daily program
• You can also delete an individual switching point by selecting it with the left
mouse button and then moving it to a neighboring switching point
Editing the time switch program:
For editing time switches, it is also possible to use the following commands. For that
purpose, use the right mouse button to click in the window and use the following
menus:
• Cut daily program
• Copy daily program
• Paste daily program
5.7 Holidays / special days
To program holidays or special days, the Calendar window is opened if an entry is
opened for writing.
Making entries:
To enter holidays or special days, select the Reason first:
• Holidays are highlighted in green: Holidays are 7-day programs
• Special days are highlighted in red: Special days are 24-hour programs
Start and end can be entered either graphically or manually. The start of an entry is
marked by a dot
• Graphic entry: Use the left mouse button to click on the first day of the entry.
Keep the left mouse button depressed and select the last day of the entry. Now,
release the mouse button. Only entire days can be graphically entered
• Manual entry: Select date and time of day of Start and End of the entry
You can select whether the entry shall be repeated on a yearly basis.
After having completed the definition of an entry, adopt it by clicking the Add button.
To transfer the entire changed program to the controller, click the OK button.
Removing entries:
Select the holidays or special days you want to remove. Click the Remove button to
remove the selected entries. To transfer the entire changed program to the controller,
click the OK button.
If several entries are defined for the same day, they can be individually selected with
the arrow buttons.
Holidays / special days