User Manual

96/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 5 Tips and tricks Dec. 1, 2005
5.8 Wizard
Certain data points can only be changed together with other data points. The
existence or setting ranges of such data points can be dependent on other data
points. If you want to change such a value in the parameter set, the ACS uses an
entry tool to guide you through all parameters that need to be changed.
1. The entry tool opens the Wizard window with the first parameter of the row. This
value can now be changed by entering the value or by clicking the Default button.
2. You can change the next parameter by clicking the Next > button.
3. You can return to one of the previous parameters by clicking the < Back button.
4. After having reached the last parameter and made the setting, you can end the
whole process by clicking the Finish button. It is only now that the new
parameters are adopted by the parameter set.
The process can be aborted at any time by clicking the Cancel button. In that case,
all settings made with the help of the entry tool will be lost.
5.9 Delete
Select the element you want to delete. Press the right mouse button and select
Delete, or press the DEL key.
If you wish, you can also use the following button for this command:
5.10 Copy / Paste
Copy Paste
Button
Combination keystrokes Ctrl+C Ctrl+V
Context menu Position the onscreen pointer on the Popcard, trend,
data point, text or link you want to copy. Press the
right mouse button and select Copy. Position the
onscreen pointer on the location where you want to
insert the object. Then, press again the right mouse
button and select Paste. The copy of the object is
now inserted at the required location.
5.11 Properties
Select the element whose properties you want to change. Press the right mouse
button. A window is opened. In the window, select Properties... Then, the Properties
window is opened and you can change the properties of the element.
If you wish, you can also use the following button for this command:
Wizard
Delete
Copy / Paste
Properties