User Manual

ManualsBrandsSiemens ManualsExtinguishing - Cylinder Valve ActuatorsACTF230-PNEUMX

A6V11930699_en--_a Smart Infrastructure

2020

Building Products

Sinorix™

ACTF230-PNEUMX

IG-01, IG-55, IG-100, IG-541, CO2

Pneumatic actuator for F230 cylinder valve

● Compatibility with F230 valves

● Mounting on the actuation port PM

● Product includes: pneumatic actuator, rotating tee fitting, and blanking plug

Product code: S54476-B520-A3

Summary of content (6 pages)

PAGE 1
Sinorix™ ACTF230-PNEUMX IG-01, IG-55, IG-100, IG-541, CO2 Pneumatic actuator for F230 cylinder valve ● Compatibility with F230 valves ● Mounting on the actuation port PM ● Product includes: pneumatic actuator, rotating tee fitting, and blanking plug Product code: S54476-B520-A3 A6V11930699_en--_a 2020-09-02 Smart Infrastructure Building Products
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions An actuator is a valve opening device used to release the gas contained in the cylinder. The pneumatic actuator is fitted to the cylinder valve PM actuation port. It is activated by the pressure from the pilot line. The ACTF230-PNEUMX actuator can be used alone or in parallel with a solenoid actuator.
PAGE 3
Resulting actuator configurations (EL) actuation port (PM) actuation port - ACTF230-PNEUMX ACTF230-EL ACTF230-PNEUMX ACTF230-EL M ACTF230-PNEUMX Other associated products Reference Description Product code BLEED-360 bleed valve PN360 L6 S54476-B530-A2 Notes Safety This product may only be installed by Siemens-authorized specialized installers, with experience in the design, installation and maintenance of automatic extinguishing systems.
PAGE 4
Mounting ● ● ● ● ● ● ● ● Remove the cap from the PM actuation port. Screw the actuator onto the PM valve actuation port by hand. Tighten using a 24 mm wrench: Torque: 8 Nm Screw the actuator's tee fitting onto the actuator body by hand. Screw the pilot hoses and/or the bleed valve at the end of the pilot line onto the L6 outlets of the tee fitting by hand. Adjust the position of the hoses to guide the actuator's tee fitting.
PAGE 5
Technical data Technical data Actuation pressure nominal PN16 (bar) minimum 16 bar(1) maximum 360 bar Gaseous agent IG-01, IG-55, IG-100, IG-541, CO2 Thread Actuator M18x1 F230 cylinder valve (PM actuation port) Tee fitting L6 (M12x1.5) Materials Actuator body Brass Tee fitting / L6 blanking plug Galvanized steel Seal NBR Operating temperature -20 °C to +50 °C, non-condensing Transport and storage temperature -40 °C to +70 °C, non-condensing Weight 0.
PAGE 6
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 6 Siemens Schweiz AG Building Products Document ID A6V11930699_en--_a Edition 2020-09-02 © Siemens Switzerland Ltd, 2019 Technical specifications and availability subject to change without notice.