User Manual

ManualsBrandsSiemens ManualsOtherAir handling units, heat exchanger and chiller plant bundle

EPD - Type II

Based on ISO 14021

S54400-F513-A1 MEA20m-24 IO Module 24V migr. MEA11-2

S54400-F512-A1 MEA20m-48 IO Module 48V migr. MEA11-2

S54400-F511-A1 MEA20a-24 IO Module 24V 2LT/2LC

S54400-F510-A1 MEA20a-48 IO Module 48V 2LT/2LC

S54400-S518-A1 Addressable EOL element

Designation

Product line, product range

Siemens S.A.S

Smart Infrastructure Building Products

15-17 avenue Morane Saulnier

78140 Vélizy-Villacoublay, France

Management System since by

ISO 9001 (Quality) 30.09.2019 AFNOR

ISO 14001 (Environment) 30.09.2019 AFNOR

OHSAS 18001 (OH&S) 30.09.2019 AFNOR

Typical energy consumption variant *) see below

Maintenance

Fire protection according to

Fire load variant *) see below

PE Plastic bag 6 … 31g

22-PAP Paper Editing instructions 0 … 8g

MEA20 evolution

Environmental

Product Declaration

Type of equipment /

Product No.

Not necessary

EN 60950

Type of equipment /

Product No.

MEA20m-24 IO Module 24V migr. MEA11-2

MEA20m-48 IO Module 48V migr. MEA11-2

MEA20a-24 IO Module 24V 2LT/2LC

Product

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal

during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Product use

Risk of fire

56V*7mA

Packaging

Restricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Type of equipment / Product No. Product S54400-F513-A1 MEA20m-24 IO Module 24V migr. MEA11-2 S54400-F512-A1 MEA20m-48 IO Module 48V migr. MEA11-2 S54400-F511-A1 MEA20a-24 IO Module 24V 2LT/2LC S54400-F510-A1 MEA20a-48 IO Module 48V 2LT/2LC S54400-S518-A1 Addressable EOL element Type of equipment / Product No. Product MEA20m-24 IO Module 24V migr. MEA11-2 MEA20m-48 IO Module 48V migr.
PAGE 2
EPD - Type II Based on ISO 14021 Notes on disposal One-way, recyclable Total weight of device Materials variant *) see below The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; halogenated; solder SnAgCu PCBA to MEA20m Mainboard 0 … 116g FR4; halogenated; solder SnAgCu PCBA to MEA20a Mainboard 0 … 115g FR4; halogenated; solder SnAgCu PCBA ELC20a 0 … 90g FR4; halogenated; solder SnAgCu PCBA to CA4190 (MEA20i-24) 0 … 64g Total weight of device 837 774 837 773 Molded equipped case 640 640 640 640 Restricted Page 3/6 S54400-S518-A1 S54400-F510-A1 S54400-F511-A1 [g] S54400-F512-A
PAGE 4
EPD - Type II Based on ISO 14021 Screw Female connector PCBA to MEA20m Mainboard 3 3 3 3 15 15 15 15 115 115 115 115 PCBA to MEA20a Mainboard PCBA ELC20a 90 PCBA to CA4190 (MEA20i-24) 64 64 Fire load [MJ] 15 14 15 14 [kWh/a] 4 4 4 4 Typical energy consumption Special components (part of the assembled PCB) [pcs] Restricted Page 4/6 2
PAGE 5
EPD - Type II Based on ISO 14021 Packaging Plastic bag [g] Editing instructions 30 30 30 30 8 8 8 8 5 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws.
PAGE 6
EPD - Type II Based on ISO 14021 Environmental benefits - Very low energy consumtion. Legal Disclaimer: This declaration is for information purpose only. This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period. Siemens S.A.