Installation Instructions

TABLE 2
AD-3ILP COMPATIBILITY
System/Module Compatible Detectors
MXL/MXL-IQ Control Panel ILP-1, ILP-2*
System XL3 (INX-3) ILP-1
*The ILP-2 is only compatible with MXL/MXLV Rev. 8.0 or greater firmware and MXL-IQ
Rev. 3.0 or greater firmware. When the CSG-M is configured, the DUCT application must
be selected.
DO NOT USE air duct detectors with Alarm Verification.
TABLE 3
DETECTOR DATA
2
metsySytivitisneSteSwoH
mralA
rotacidnI
.oNxaM
enoZ/srotceteD
RE2-PC
)4-MZC(QI-LXM/LXM
3metsyS
LXPmetsyS
LXSmetsyS
XE-LXSmetsyS
)3-XNZ(3LX
eeS
rotceteD
lebaL
yrotcaF
teS
;ydae
tsDELdeR
vpusniFFO
03:I3-DA
seirosseccaoN(
)LXSrof
QI-LXM/LXM
)6B1/1-MZC(
yrotcaF
teS
;ydaetsDELdeR
vpusniFFO
51
:I3-DA
)seirosseccaoN(
)3-XNI(3LXmetsySdetceleS
lortnoCta
lenaP
yrevesehsalfDELdeR
;sdnoces3
vpusniFFO
03:I3-D
A
03:PLI3-DA
QI-LXM/LXM
lenaPlortnoC
detceleS
lortnoCta
lenaP
yrevesehsalfDELdeR
vpusniFFO;sdnoces3
06:I3-DA
06
:PLI3-DA
TABLE 4
AIR DUCT CONDITIONS
Temperature Range: 32
O
F (0
O
C) - 100
O
F (38
O
C) per UL 268/268A
Altitude Range:
Model Detectors Range
AD-3I DI-B3, ILI-1B 0-4000 feet
DI-B3H, ILI-1BH 3000-8000 feet
AD-3ILP No altitude limitations
Relative Humidity Range: 0-93% (non-condensing) per UL 268-268A
Air Duct Velocity Range: 500-4000 ft/min – AD-3I
300-4000 ft/min – AD-3ILP
Sampling Tube Pressure Range of Differences:
.017-1.07 inches of water column for AD-3I
.006-1.07 inches of water column for AD-3ILP