User Manual

12/20
Smart Infrastructure CC1N7560en
3/4/2020
Technical data (continued)
Connection cross sections, conductor screw connection
 Stranded conductor, fine-wired
(flexible)
Cross section
Min. 0.14 mm²
Max. 1.5 mm²
 Stranded conductor, fine-wired
(flexible) with ferrule
Cross section
Min. 0.25 mm²
Max. 1 mm²
 Stripping length Approx. 7 mm
 Screw tightening torque 0.25 Nm

Note!
AGG9 connector sets!
The AGG9 connectors on the connecting cables for the LMV6 may only be removed or
replaced when the plant is shut down (all-pole disconnection)!
Insertion force / contact
4 N
Withdrawal force / contact
1 N
Tightening torque / screw 0.5 Nm in accordance with
DIN EN 60335-1
Contacting with flat pin connector 6.3 x 0.8 mm in accordance with
DIN EN 46244
Male multipoint connector in accordance
with RAST5 standard
Connection cross sections, conductor screw connection
 Stranded conductor Cross section max. 2.5 mm²
 Stranded conductor with ferrule Cross section max. 2.5 mm²
 Stripping length Approx. 8 mm

Note!
AGG9 connector sets!
The AGG9 connectors on the connecting cables for the LMV6 may only be removed or
replaced when the plant is shut down (all-pole disconnection)!
RAST3.5 connecto
r
Mechanical data
RAST5 connecto
r
Mechanical data