User Manual

7/16
Building Technologies Division CC1N7118en
19.05.2016
Test adapter (must be ordered separately)
Test adapter KF8833
 For checking the functions of burner controls on the
burner
 With signal lamps for program indication
 With one pair of jacks for measuring the flame detector
current
Test adapter KF8840
 For checking the functions of burner controls on the
burner
 With signal lamps for program indication
 With on / off switch for simulating the flame signal
 With holes for checking the control voltages at the tabs of
the burner control
 With one pair of jacks for measuring the flame detector’s
resistance
Test adapter KF8885
 For checking the functions of burner controls on the
burner
 With switch for manual startup of burner
 With switch for simulating the oil preheater’s release
contact
 With 2 pairs of jacks for measuring the flame detector
current
Refer to Mounting Instructions B7986