User Manual

ManualsBrandsSiemens ManualsTEVA (BC4)Electromotoric actuators SSP..

CA1N4864en_02

2018-07-26

Building Technologies

864

Electrical Actuators

for small valves VVP47..., VXP47..., VMP47...

SSP31...

SSP81...

SSP61...

∂ SSP31... operating voltage AC 230 V 3-position control signal

∂ SSP81... operating voltage AC 24 V 3-position control signal

∂ SSP61... operating voltage AC / DC 24 V DC 0…10 V control signal

∂ Nominal force 160 N

∂ Automatic identification of valve stroke

∂ Direct mounting with coupling nut, no tools required

∂ Basic types complete with plug-in connecting cable, length 1.5 m

∂ Optional cable types

∂ Cable length 2.5 m and 4.5 m

∂ Halogen-free cables

∂ Manual override and position indication

∂ Parallel connection of multiple actuators possible

Use

For operation of Siemens valves of the V…P47… series for water-side control of hot

and cooling water in heating, ventilation and air conditioning systems.

In conjunction with the AL100 adapter, the actuators are also suitable for use with the

2W…, 3W… and 4W… valves

Summary of content (10 pages)

PAGE 1
4 Electrical Actuators for small valves VVP47..., VXP47..., VMP47... 864 SSP31... SSP81... SSP61... ∂ ∂ ∂ ∂ ∂ ∂ ∂ ∂ SSP31... operating voltage AC 230 V 3-position control signal SSP81... operating voltage AC 24 V 3-position control signal SSP61... operating voltage AC / DC 24 V DC 0…10 V control signal Nominal force 160 N Automatic identification of valve stroke Direct mounting with coupling nut, no tools required Basic types complete with plug-in connecting cable, length 1.
PAGE 2
Type summary Type reference Operating voltage SSP31 1) SSP81 SSP81.04 1) SSP61 AC 230 V 1) Run time at 50 Hz 150 s AC 24 V Connecting cable 3-position 43 s 34 s AC / DC 24 V Control signal 1.5 m DC 0...10 V are UL and cUL approved Accessories Type reference ASY3L25 ASY3L45 ASY8L25 ASY8L45 ASY8L45HF ASY6L25 ASY6L45 ASY6L45HF Retaining screw ASY98 Description Connecting cable 2.5 m Connecting cable 4.5 m Connecting cable 2.5 m Connecting cable 4.5 m Connecting cable 4.
PAGE 3
Delivery Actuators, valves and accessories are packed separately. Items are supplied individually packed. Rev.-Nr. Overview tables see page 9. Equipment combinations Direct mounting With AL100 adapter for retrofitting 3 kvs [m /h] Type reference Valve type VVP47... 2-port valves VXP47... 3-port valves VMP47... 3-port valves with T-bypass 0.25...2.5 2W...K... 2-port valves 0.6...2.5 3W... 3-port valves 0.6...4.0 4W... 3-port valves with T-bypass 0.6...2.5 PN class Data sheet 0.
PAGE 4
Notes The actuators must be electrically connected in accordance with local regulations (refer to «Connection diagrams»), page 8. Engineering Caution Regulations and requirements to ensure the safety of people and property must be observed at all times! The permissible temperatures (refer to «Technical data», page 6) must be observed. The connecting cable of the actuator may come into contact with the hot valve body, provided the temperature of the valve body does not exceed 80 °C.
PAGE 5
Note: Correct calibration is only possible with valve. The second or third attempt at calibration occurs automatically after an 8-minute delay. After three failed calibration attempts the actuator stem remains in the extended position and the V…P47… valves are opened. Operation A 3 mm hexagonal socket wrench can be used to move the actuator to any position between 0 and 1. However, if a control signal from the controller is present, then this takes priority in determining the position.
PAGE 6
Technical data SSP31... Control Operating voltage Voltage tolerance Rated frequency Max. power consumption Fuse for incoming cable (fast) Control signal Functional data Active stroke range for DC 0...10 V Input impedance for DC 0...10 V Parallel operation 4) (number of actuators) Run time for 2.5 mm stroke at 50 Hz AC 230 V ± 15 % AC 24 V AC 24 V or DC 24 V ± 20 % ± 20 % ± 25 % 50 / 60 Hz 6 VA 0.8 VA 2.5 VA 2 A, quickblow 1) 3-position DC 0...10 V max.
PAGE 7
4) Provided the controllers’ output is sufficient 5) The documents can be downloaded from http://siemens.com/bt/download General ambient conditions Operation EN 60721-3-3 Transport EN 60721-3-2 Storage EN 60721-3-1 Environmental conditions Temperature Class 3K3 +1...+50 °C Class 2K3 –25...+70 °C Class 1K3 –5...+50 °C Humidity 5...85 % r.h. < 95 % r.h. 5...95 % r.h. Connecting cable ASY3L.. with SSP31..
PAGE 8
SSP31… L 4864A01 Connection diagrams 2AF (L) Q1 Q2 (Y1) (Y2) AC 230 V (N) N N Y L N Y1, Y2 Q1, Q2 Controller Actuator System potential AC 230 V System neutral Control signal OPEN, CLOSE Controller contacts N Y SP, G SN, G0 Y1, Y2 Q1, Q2 Controller Actuator System potential AC 24 V System neutral Control signal OPEN, CLOSE Controller contacts Y1 Y2 N Y SSP81... SP 4864A02 N 2AF (G) Q1 Q2 AC 24 V (G0) (Y1) (Y2) N Y1 Y2 G Y SSP61...
PAGE 9
Dimensions 48 77 72 4864M01 All dimensions in mm 20 9 M30 x 1,5 AL100 83 Revision numbers Type reference SSP31 SSP81 SSP81.04 Valid from Rev.-No. J J J Type reference SSP61 Valid from Rev.-No.
PAGE 10
Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Theilerstrasse 1a 6301 Zug Switzerland Tel. +41 58-724 24 24 www.siemens.com/buildingtechnologies © Siemens Switzerland Ltd, 2004-2016 Technical specifications and availability subject to change without notice.