Operation Manual

10
AL180/AL185/AL280/AL285 / MEA EN / A31008-M2003-R101-1-UZ19 / main.fm / 31.10.2008
Assigning key 1 for fast access to the
answer machine (network mailbox)
Simply press and hold key 1 on the handset and
you will be connected directly to the answer
machine (network mailbox).
See Menu tree
¢ p. 15.
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Preconditions:
◆ You have set a system PIN other than 0000
¢ p. 16.
◆ The phone you are using for remote operation
has touch tone dialling (DTMF), i.e. you hear
different tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number) ¢ while listening to
your announcement: press the 9

key and enter the
system PIN
The following keys are used for operation:
Activating the answer machine
~
(Enter your own number and allow the phone to
ring until you hear the message: "Please enter PIN")
¢ ~ enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deac-
tivated remotely.
Locating a handset ("paging")
You can locate your handset using the base station.
◆ Briefly press the registration/paging key on the
base station (
¢ p. 1).
◆ All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: brie
fly press the register/paging key
on the base station (
¢ p. 1) or the talk key c on
a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset AL18H/AL28H) recommended).
For automatic registration of handsets to
Gi
gaset AL180/AL185/AL280/AL285, see
¢ p. 5.
Manual registration of handsets to
Gigaset AL180/AL185/AL280/AL285
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ Enter the sys-
tem PIN of the base station (default is 0000) ¢ OK.
Registering flashes in the display.
2. On the base station: wit
hin 60 sec. of entering
the system PIN, press and hold the registration/
paging key (
¢ p. 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset every other setting
¢ p. 11.
If you have on
ly registered handsets for other GAP-
compatible devices, these can only be de-regis-
tered with a h
ardware reset ¢ p. 11.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
◆ INT ¢ ~ (1...4, enter internal number of the
handset)
¢ OK, the handset is called or
◆ INT ¢ star key P ¢ OK, all handsets are
called.
When a participant answers you can speak to
t
hem. To end the call, press
a.
A
Go to the start of the current message.
Press twice to go back to the previous
mes
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Please note:
Each
additional handset must be registered on
the base station in order for it to work properly!