User Manual

9
Siemens A6V10564480_en--_-g
Building Technologies 2020-05-05
Flow direction
Make sure that the valve is mounted in the proper flow direction. Flow direction is indicated
on the ball valve body by the symbol on the type label:
Commissioning
The rotary actuator must be properly mounted before commissioning the 6-port control ball
valve. The 6-port control ball valve is delivered in a closed state (middle position).
Maintenance
The 6-port control ball valve VWG41.. is maintenance free.
Disposal
The valve is considered an electronic device for disposal in accordance with
the European Guidelines and may not be disposed of as domestic garbage.
● Dispose of the valve through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
Warranty
Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that
third-party products are used.