User Manual

SIGMACONTROL Multiple control module SPF 5200
● Control of alerting equipment or local plant facilities by means of
SIGMALOOP
● Up to eight contacts can be individually activated
Application and mechanical construction
The control module SPF 5200 serves the purpose of selective activation of alerting
equipment or local plant facilities (air-conditioning systems and machinery, etc.).
The activation function can be freely programmed and assigned to any activation
criteria.
The control module SPF 5200 is used mainly for central control tasks and for
minimizing the wiring complexity.
Eight changeover contacts can be connected either floating or non-floating.
The control module can be accommodated in the space provided for optional
equipment in the control and indicating panel or at a decentralized location in
commercially available junction boxes.
The control module is a SIGMALOOP user and uses one loop address. The func-
tion and power supply are monitored constantly. Equipped with micro-processor.
Integrated isolating elements ensure unrestricted function in the event of short cir-
cuit on the detector bus.
Technical Data
Operating voltage
12 V to 28 V
Current consumption at 12 V/28 V
per relay
6 mA / 14 mA
Switching voltage, min./max. 12 V / 30 V
Switched current, min./max 15 mA / 1 A
Total switched current/SPF 5200 5 A
Relay contact
Changeover contact
Number of A/R relays 8
Activation mode Static
Protection class Depending on housing
Weight 0.170 kg
Dimensions in mm (L x W x H) 117 x 117 x 20
Permitted ambient temperature –25 °C to +70 °C