User Manual

ManualsBrandsSiemens ManualsFire - Panels & SystemsAlgoRex EP7F-/2.2 Release Notes for Service Technicians

EPD - Type II

Based on ISO 14021

A6E60200847 SSI3020M

Designation

Product line, product range

SSI3020M

Product

STT20; FC20

Environmental

Product Declaration

Type of equipment /

Product No.

SSI3020M : A6E60200847Type of equipment /

Product No.

Siemens S.A.S.

Division BUILDING TECHNOLOGIES (BT)

617, rue Fourny

78531 Buc Cedex - France

Management System since by

ISO 9001 (Quality) 22.03.2017 AFNOR

OHSAS 18001 (OH&S) 07.03.2017 AFNOR

ISO 14001 (Environment) 07.03.2017 AFNOR

Typical energy consumption 625kWh/a

Maintenance

Fire protection according to

Fire load

20-PAP Corrugated fiber board Main Package 2 231g

20-PAP Corrugated fiber board Piece of cornerboards of protection 290g

20-PAP Corrugated fiber board Cornerboards of protection 188g

4-LDPE Plastic Bag 4g

22-PAP paper Installation instructions 298g

Packaging

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal

during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Product use

Risk of fire

Maximum value in nominal mode

Change of batteries

On notice

EN 60950

Restricted

Page 1/5

Summary of content (5 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Product Type of equipment / Product No. A6E60200847 Product Type of equipment / Product No. SSI3020M : A6E60200847 Designation SSI3020M SSI3020M Product line, product rangeSTT20; FC20 Process control Siemens S.A.S. Division BUILDING TECHNOLOGIES (BT) 617, rue Fourny 78531 Buc Cedex - France Management System since by ISO 9001 (Quality) 22.03.2017 AFNOR OHSAS 18001 (OH&S) 07.03.2017 AFNOR ISO 14001 (Environment) 07.03.
PAGE 2
EPD - Type II Based on ISO 14021 Notes on disposal recyclable Total weight of device Materials 32 342g The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II Based on ISO 14021 FR4; solder SnAgCu Special components (part of the assembled PCB) [g] Total weight of device A6E60200847 *Variant parts list 32 342 Anti-vibration plate 4 Hub cap ENJOL 20 57 Hub cap ELMAS 20 127 Hub cap of façade BC11 590 Clamp 31 Self-adhesive base 24 Angle bracket 21 Keyboard 40 Junction block 337 Lexan 10 Flexible keyboard 77 Blind plug 2 Accessories Spacer 73 11 Blanking plate Manufactured bar Grounded terminal flexible braid Coffret usin
PAGE 4
EPD - Type II Based on ISO 14021 LCD display 186 Loadbreak connector 38 Terminal block 34 Label 11 Power supply equipment 787 Insulating 13 Insulating MGB20 44 FC2040-FX Fire cont.
PAGE 5
EPD - Type II Based on ISO 14021 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws. Disposal Comments EU-directive 2011/65/EU (RoHS) The device does not contain substances in concentrations and applications banned under the EU RoHS Directive. Regulation (EC) No.