User Manual

ManualsBrandsSiemens ManualsFire - Panels & SystemsAlgoRex EP7F-/2.2 Release Notes for Service Technicians

CS1115

Fire detection control unit

Phase 4

CI1115

D 1 loop model for

− up to 128 individually addressable fire detectors AnalogPLUS,

series DS1130

D 2 or 4 loop models for

− up to 256 or 512 individually addressable fire detectors Analog-

PLUS, series DS1130

− 4 or 12 detection lines with 32 fire detectors each with collective

evaluation, series DS1100 (option)

D User functions can be programmed:

− either on site via operating panel

− or offline via configuration tool SWE1115

D Automatic or manual absent/present switchover

D Automatic switchover summer/winter time

D Up to 200 events can be stored chronologically and recalled

D Remote transmission of alarm and fault

D Input/output box on LON-Bus

D Emergency power operating period up to 72 hours, depending on

used batteries

D Add-on power supply

D One or two serial interfaces parameterizable for:

− printer and/or paging system

− LON-Bus for ancillary display and control panels

− Third party building management systems

Fire & Security Products

Siemens Building Technologies

Summary of content (6 pages)

PAGE 1
CS1115 CI1115 Fire detection control unit Phase 4 D 1 loop model for − up to 128 individually addressable fire detectors AnalogPLUS, series DS1130 D 2 or 4 loop models for − up to 256 or 512 individually addressable fire detectors AnalogPLUS, series DS1130 − 4 or 12 detection lines with 32 fire detectors each with collective evaluation, series DS1100 (option) D User functions can be programmed: − either on site via operating panel − or offline via configuration tool SWE1115 D Automatic or manual absent/p
PAGE 2
System overview Addressable detector bus (stub line or loop) for AnalogPLUS series DS1130 fire detectors DJ1191 DJ1192 DT1131A DOT1131A DC1131 DC1134 DO1131A DO1133A DM1134 DC1136 FCI FCI Alarm devices DC1192 DF1192 Alarm reception centre (Fire brigade) DC1192 Fire control installations (FCI) DO1101A DJ1191 DJ1192 CI1115 DT1101A/02A DO1101A DO1101A FBF FSD ÜE DO1101A Collective detection line for series DS1100 fire detectors (also MS6, MS7, MS9, MS24) 1 or 2 serial interfaces VdS p
PAGE 3
AnalogPLUS fire detectors, series DS1130 Addressable detector system with intelligent signal evaluation.
PAGE 4
Models CI1115-1A CI1115-1 CI1115-2 CI1115-3 CI1115-4 CI1115-NL CI1115-SK1 CI1115-SK2 CI1115-3-STT CI1115-1A CI1115-1, CI1115-2, CI1115-3, CI1115-4, CI1115-SK1, CI1115-SK2, CI1115-NL Detector loops 1 2+2 Addressable AnalogPLUS detectors and input modules max. 128 max. 512 Addressable AnalogPLUS output modules max. 64 max. 64 Collective detector lines − 4 / 12 (optional) Programmable outputs on LON−bus max. 256 max. 256 Programmable inputs on LON−bus max. 16 max.
PAGE 5
Operation D D D D D D Simple, logical, menu-guided operation Illuminated text display with 4 x 40 characters Simultaneous display of two events Specific customer text per room, zone or detector Operating access by means of password or by key switch (option) Four different user operating levels 1:29min ZONE 52/09 AUTOMATIC ALARM 1st floor office 101 1 ( 1) Example 1 2 3 4 5 7 8 9 F1 4 5 6 F2 1 2 3 ok del 0 hm Start/ Stop 6 7 8 1 2 3 4 5 6 7 8 ALARM" display field with LED bar Illuminat
PAGE 6
Technical data Power supply main board − mains operating voltage − power consumption − system supply voltage − max. current nom. 115/230VAC, ±15% (VdS: +10%), 50/60Hz max. 100VA (CI1115-1A: max. 50VA) 21.5 ... 29.5VDC (temperature compensated) 2.5A (CI1115-1A: 1.5A) Optional power supply − mains operating voltage − power consumption − system supply voltage − max. current (CI1115-1A excluded) nom. 115/230VAC, ±14% / −20%, 50/60Hz max. 120VA 29.6VDC ±2% 3.5A Emergency power battery 2 x 12V / max.