Installation Instructions

528498

01.99

outputs

alarm contact

horns 3 and 4

lines 5 to 8

connection to

K3X020 connector A

5V supply

voltage

available

4 spacer bolts L=25

connector A

4 EOL20

2 resistors 12kΩ/½W

Jumper X1 – X4 (X1 = line 1, X2 = line 2 etc.)

Pos. ’left’ = detector series Cerberus (default)

Pos. ’right’ = detector series SynoLINE 300

! only available with index ’a’ onwards

! jumper must be either on pos. ’left’ or ’right’ (do not remove)

New

outputs

lines 5 to 8

connection to

K3X020 connector A

lines 9 to 12

lines 13 to 16

4 spacer bolts L=25

12 EOL20

connector A

Jumper X21 – X32 (X21 = line 1, X22 = line 2 etc.)

Pos. ’bottom’ = detector series Cerberus (default)

Pos. ’top’ = detector series SynoLINE 300

! only available with index ’c’ onwards

! jumper must be either on pos. ’left’ or ’right’ (do not remove)

New

PAGE 1
outputs alarm contact horns 3 and 4 connector A lines 5 to 8 connection to K3X020 connector A 4 EOL20 5V supply voltage available 4 spacer bolts L=25 New Jumper X1 – X4 (X1 = line 1, X2 = line 2 etc.) Pos. ’left’ = detector series Cerberus (default) Pos. ’right’ = detector series SynoLINE 300 ! only available with index ’a’ onwards ! jumper must be either on pos.
PAGE 2
outputs alarm contact horns 3 and 4 connector A lines 5 to 8 connection to K3X020 connector A 4 EOL20 5V supply voltage available 4 spacer bolts L=25 New Jumper X1 – X4 (X1 = line 1, X2 = line 2 etc.) Pos. ’left’ = detector series Cerberus (default) Pos. ’right’ = detector series SynoLINE 300 ! only available with index ’a’ onwards ! jumper must be either on pos.