Manufacturer Declaration

SIEMENS
Manufacturer Declaration
N O . DM1103_MDEx_SBT 1606
Manufacturer:
Hersteller:
Siemens Switzerland Ltd.
Infrastructure & Cities Sector
Building Technologies Division, Fire Safety
Address:
Anschrift:
Gubelstrasse 22
CH-6301 Zug / Switzerland
Product description:
Produktbezeichnung:
DM 1103 collective m anual call point
(Number A5Q00004470 / BPZ;5222870001 / BPZ:5358470001)
Statement:
The product meets the requirements given by the Standard EN 60079-11:2012, “Electrical apparatus for explosive gas
atmospheres, Part 1 1 : Intrinsic safety "i"”. Within the Standard it falls into the category “simple apparatus” (clause 5.7
a), passive components). It has negligible internal inductance and capacity.
The designated product does not have an “own potential source of ignition” and therefore it is not subject to the ATEX
Directive (EU Directive 2014/34/EU, article 1, clause 1(a) and 2, clause (1)).
Compliance is only guaranteed in conjunction with the label “avoid electrostatic charging”. The label must be applied
in such a way that it is easily legible in the installed condition.
Ex-Classification: Ex ib IIC T4 (Ta < +70°C). Only for connection to a certified safety barrier with Ro £ 280 O. Maximum
values: Ui = 28 V, I, = 100 mA, Pi = 700 mW.
For further installation instruction please consult ourdocument “Fire alarm Signal in areas at risk of explosion”, document
number 001204.
CH-6301 Zug, 09.06.2016
Siemens Schweiz AG
Quality Manager Fire Safety
Siemens Schweiz AG
Building Technologies Division
International Headquarters
Head: Matthias Rebellius
DM1103_MDEx_SBT1606.docx
Siemens Schweiz AG, Building Technologies Division, International Headquarters
BT CPS FS
Gubelstrasse 22
6300 Zug
© Siemens Schweiz AG, Building Technologies Division