Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers

Technical Specification Sheet

Document No. 149-203

December 2, 2009

Siemens Industry, Inc.

Page 1 of 19

Power Modular Equipment Controller for

BACnet Networks

Figure 1. Power Modular Equipment Controller.

Description

The Power Modular Equipment Controller (MEC) for

BACnet® Networks is an integral part of the

APOGEE® Automation System. The controller is a

part of a family of high performance, modular Direct

Digital Control (DDC) supervisory equipment

controllers. It is classified as a BACnet Building

Controller (B-BC) and supports BACnet/IP and

BACnet MS/TP protocols.

The Power MEC operates stand-alone or networked

to perform complex control, monitoring and energy

management functions without relying on a higher-

level processor. The Power MEC communicates with

other field panels or workstations on a peer-to-peer

Automation Level Network (ALN) and supports native

BACnet/IP communications over 10/100 MB Ethernet

networks.

The Power MEC can optionally provide central

monitoring and control for distributed Field Level

Network (FLN) devices (wired or wireless).

Based on the Power MEC part number selected, the

FLN may support RS-485 for configurable BACnet

MS/TP or P1 support or LonTalk® protocol support.

Features

 BACnet Testing Laboratories (BTL) certified

Classified as BACnet Building Controllers (B-BC)

using the BACnet/IP protocol and/or BACnet

MS/TP.

 Several versions of controllers to match

application requirements.

 Remote-mounted external analog and digital point

expansion modules for added point expansion,

which may be independently operated as FLN

devices or directly controlled on an optional point

expansion bus.

 Proven program sequences to match equipment

control applications.

 Built-in energy management applications and

DDC programs for complete facility management.

 Comprehensive alarm management, historical

data trend collection, operator control and

monitoring functions.

 Sophisticated Adaptive Control, a closed loop

control algorithm that auto-adjusts to compensate

for load/seasonal changes.

 Message control for terminals, printers, pagers

and workstations.

 Optional Hand Off Auto (HOA) control switches.

 Option for compatibility with L

ONWORKS®

networks.

 Optional P1 Wireless FLN support.

Summary of content (19 pages)

PAGE 1
Technical Specification Sheet Document No. 149-203 December 2, 2009 Power Modular Equipment Controller for BACnet Networks Based on the Power MEC part number selected, the FLN may support RS-485 for configurable BACnet MS/TP or P1 support or LonTalk® protocol support. Features  BACnet Testing Laboratories (BTL) certified Classified as BACnet Building Controllers (B-BC) using the BACnet/IP protocol and/or BACnet MS/TP.  Several versions of controllers to match application requirements.
PAGE 2
DIGITAL INPUT CONNECTORS DI2 43 DI3 65 HOA LED DI4 87 9 10 DI5 11 12 DI6 13 14 DI7 15 DI8 16 A ANALOG OUTPUT CONNECTORS A 25 + 17 + AO13 26 AO9 18 27 A+ 19 + AO14 28 AO10 20 29 + 21 + AO15 30 AAO11 22 31 + AO16 32 23 + AO12 24 - 24 VDC SENSOR POWER SHIELD TERMINATION A A HOA CONTROL SWITCHES 0A DIGITAL OUTPUT CONNECTORS 24 VAC POWER CONNECTOR 53 + 24 VDC 54 55 SENSOR 56 SUPPLY 49 50 51 52 SHIELD AI21 4241-+ 33 + 34 AI22 4443-+ AI18 3635-+ AI23 4645-+ AI19 3837-+ 47 + AI24 48 AI20 4039-+ FL
PAGE 3
The 1200EFB controllers support 3 FLN trunks for communications with a total of 96 FLN devices, or one BACnet MS/TP trunk supporting up to 96 devices. The 1200ELB controllers support 1 FLN trunk for communications with a maximum of 126 LONWORKS devices. The program and database information stored in the Power MEC RAM memory is battery-backed. This eliminates the need for time-consuming program and database re-entry in the event of an extended power failure.
PAGE 4
Modular Equipment Control with Application Flexibility Built-in Direct Digital Control Routines The Power MECs are high performance controllers with complete flexibility to allow the owner to customize each controller with the exact program for the application. In addition, each controller can be sized to meet the hardware requirements for the application. The Power MEC provides stand-alone Direct Digital Control (DDC) to deliver precise HVAC control and comprehensive information about system operation.
PAGE 5
Specifications Dimensions: Modular Equipment Controller Analog Point Expansion Module Digital Point Expansion Module 11.4" H × 9.5" W × 3.75" D (289 mm × 241 mm × 95 mm) 6" H × 9.5" W × 3.75" D (152 mm × 241 mm × 95mm) 6" H × 9.5" W × 3.
PAGE 6
Ordering Information Controller Range Description Product Number Power MEC 1200EB, 8DI, 8DO, 8AI, 8AO, point expansion support, HOAready, BACnet/IP ALN 549-632 Power MEC 1200EFB, 8DI, 8DO, 8AI, 8AO, point expansion support, FLN support, HOA-ready, BACnet/IP ALN 549-634 Power MEC 1200ELB, 8DI, 8DO, 8AI, 8AO, point expansion support, LONWORKS network, HOA-ready, BACnet/IP ALN 549-636 Point Expansion Modules Description Product Number Analog Point Expansion Module, 4AI/4AO 24V HOA-ready – for MEC Exp
PAGE 7
Service Boxes and Enclosures Description Product Number PX Series Service Box— 115V, 24 Vac, 50/60 Hz, 192 VA PXA-SB115V192VA PX Series Service Box— 115V, 24 Vac, 50/60 Hz, 384 VA PXA-SB115V384VA PX Series Service Box— 230V, 24 Vac, 50/60 Hz, 192 VA PXA-SB230V192VA PX Series Service Box— 230V, 24 Vac, 50/60 Hz, 384 VA PXA-SB230V384VA 18" Enclosure (Utility Cabinet) (UL Listed NEMA Type 1 Enclosure) PXA-ENC18 19” Enclosure (UL Listed NEMA Type 1 Enclosure) PXA-ENC19 34” Enclosure (UL Listed NEM
PAGE 8
BACnet Protocol Implementation Conformance Statement Products Product Model Number Power BACnet Modular Equipment Controller 1200-EFB 1200-ELB 1200-EB Protocol Revision Software Revision 135-2004 N/A Firmware Revision 3.2 Vendor Information Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089 www.sbt.siemens.
PAGE 9
Supported BACnet Interoperability Building Blocks (BIBBs) BIBB Name Initiate Execute Data Sharing   DS-RP-A Data Sharing-ReadProperty-A DS-RP-B Data Sharing-ReadProperty-B DS-RPM-A Data Sharing-ReadPropertyMultiple-A DS-RPM-B Data Sharing-ReadPropertyMultiple-B DS-WP-A Data Sharing-WriteProperty-A DS-WP-B Data Sharing-WriteProperty-B  DS-WPM-B Data Sharing-WritePropertyMultiple-B  DS-COV-A Data Sharing-COV-A DS-COV-B Data Sharing-COV-B DS-COVU-A Data Sharing-COV-Unsolicited-
PAGE 10
BIBB Name Initiate Execute Device Management  DM-DDB-A Device Management-Dynamic Device Binding-A DM-DDB-B Device Management-Dynamic Device Binding-B DM-DOB-A Device Management-Dynamic Object Binding-A DM-DOB-B Device Management-Dynamic Object Binding-B  DM-DCC-B Device Management-DeviceCommunicationControl-B  DM-PT-A Device Management-Private Transfer-A DM-PT-B Device Management-Private Transfer-B DM-TM-A Device Management-Text Message-A DM-TM-B Device Management-Text Message-B
PAGE 11
Object Attributes O indicates that the property is optional, per the BACnet standard. R indicates that the property is required to be present and readable using BACnet services. Yes indicates that the property is required to be present, readable, and writable using BACnet services. Analog Input Object Type Property_Identifier Supported Writable Required \ Optional Object_Identifier Yes R Object_Name Yes R Object_Type Yes Present_Value Yes Yes R Description Yes Yes O Device_Type Yes O
PAGE 12
Min_Pres_Value No O Max_Pres_Value No O Resolution Yes O Priority_Array Yes R Relinquish_default Yes R COV_Increment Yes Yes O Time_Delay Yes - Alarm Notification Class Yes - Alarm Yes O O High_Limit Yes - Alarm Yes O Low_Limit Yes - Alarm Yes O Deadband Yes - Alarm O Limit_Enable Yes - Alarm O Event_Enable Yes - Alarm Acked_Transitions Yes - Alarm O Notify_Type Yes - Alarm O Event_Time_Stamps Yes - Alarm O Yes O Analog Value Object Type Page 12 of 19 P
PAGE 13
Binary Input Object Type Property_Identifier Supported Object_Identifier Yes Object_Name Yes R Object_Type Yes R Present_Value Yes Yes Description Yes Yes Device_Type Yes O Status_Flags Yes R Event_State Yes R Reliability Yes Out_Of_Service Yes Polarity Yes Writable Required \ Optional R R O O Yes R R Inactive_Text Yes O Active_Text Yes O Elapsed_Active_Time Yes Time_Of_Active_Time_Reset Yes Time_Delay Yes - Alarm Notification Class Yes - Alarm Alarm_Value
PAGE 14
Time_Delay Yes - Alarm Notification Class Yes - Alarm O Yes O Yes O Feedback_Value Yes - Alarm Event_Enable Yes - Alarm O Acked_Transitions Yes - Alarm O Notify_Type Yes - Alarm O Event_Time_Stamps Yes - Alarm O Binary Value Object Type Property_Identifier Supported Writable Required \ Optional Object_Identifier Yes R Object_Name Yes R Object_Type Yes R Present_Value Yes Yes Description Yes Yes Status_Flags Yes R Event_State Yes R R O Reliability Yes O Out_
PAGE 15
Command Object Type Property_Identifier Supported Writable Required \ Optional Object_Identifier Yes Object_Name Yes R Object_Type Yes R Description Yes Yes O Present_Value Yes Yes W In_Process Yes R All_Writes_Successful Yes R Action Yes Yes R Action _Text Yes Yes O Property_Identifier Supported Writable Required \ Optional Object_Identifier Yes R Object_Name Yes R Object_Type Yes R System_Status Yes R R Device Object Type Vendor_Name Yes R Vendor_Iden
PAGE 16
Event Enrollment Object Type Property_Identifier Supported Writable Object_Identifier Yes R Object_Name Yes R Object_Type Yes R Description Yes Event_Type Yes Notify_Type Yes Yes R Event_Parameters Yes Yes R Yes Required \ Optional O R Object_Property_Ref Yes R Event_State Yes R Event_Enable Yes Acked_Transitions Yes Notification Class Yes Event_Time_Stamps Yes Yes R R Yes R R File Object Type Property_Identifier Supported Writable Object_Identifier Yes R O
PAGE 17
Priority_Array Yes R Relinquish_default Yes R Time_Delay Yes - Alarm O Notification Class Yes - Alarm Feedback_Value Yes - Alarm Event_Enable Yes - Alarm Acked_Transitions Yes - Alarm Yes O O Yes O O Notify_Type Yes - Alarm O Event_Time_Stamps Yes - Alarm O Multi-state Value Object Type Property_Identifier Supported Writable Required \ Optional Object_Identifier Yes R Object_Name Yes R Object_Type Yes Present_Value Yes Yes R Description Yes Yes O Status_Flags
PAGE 18
Schedule Object Type Property_Identifier Supported Writable Object_Identifier Yes R Object_Name Yes R Object_Type Yes R Present_Value Yes Yes Required \ Optional R Description Yes Yes O Effective_Period Yes Yes R Weekly_Schedule Yes Yes O Exception_Schedule Yes Yes O Schedule_Default Yes Yes R List_Of_Object_Property_References Yes Yes R Priority_For_Writing Yes Yes R Status_Flags Yes R Reliability Yes R Out_Of_Service Yes Yes R Property_Identifier Sup
PAGE 19
Data Link Layer Options  BACnet IP, (Annex J)  BACnet IP, (Annex J), Foreign Device ISO 8802-3, Ethernet (Clause 7) ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8) ANSI/ATA 878.