Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers

Technical Specification Sheet

Document No. 149-1000

July 30, 2018

Document No. 149-1000

July 30, 2018

Page 1 of 6

BACnet Field Panel Web Server with

Application MC and Kiosk Mode Graphics

The BACnet Field Panel Web Server provides a full-

featured operator interface for PXC BACnet®

controllers. Using the Web Server, you can easily

monitor and control the APOGEE Building Automation

System through an intuitive Web-based user interface

from anywhere at anytime.

Description

The license-free Field Panel Web Server tools provide

full user interface functionality for the building

automation system, allowing you an alternative to

workstation software installed on a computer. The Web

Server enables system-wide access through a single

log-in from a local browser and provides features

ranging from Graphical Monitoring to programming and

reporting.

Application MC is a license-free default graphics

solution for standard Siemens BACnet MS/TP FLN

controller products. The animated default graphics

show the mechanical equipment graphics with relevant

live point update information.

Licenses are also available for custom graphics

created with the FIN Builder graphics tool and for the

FIN Lite-based graphics tool.

The Web Server takes advantage of the multitasking

PXC controllers, eliminating the need for separate

high-cost “Web appliances” or dedicated Web servers.

This means that the same field panel can serve as an

automation controller, with full building automation and

I/O features, and provides you with system information

and access using a Web browser, providing lower cost

and higher reliability.

A Web Server-enabled controller can accommodate an

unlimited number of user accounts and simultaneous

users.

Security

Meeting the demands of today’s IT systems, the

BACnet Web Server is secured from IT security threats

by means of password-protected operator access. The

Web Server uses password encryption. User accounts

can be individually configured for customized access

privileges. Operator sessions may be configured to

automatically log off during periods of user inactivity.

The BACnet Field Panel Web Server is compatible

with standard IT security policies and tools established

within a particular facility and can be protected within

that environment.

NOTE: It is strongly recommended that the BACnet

Field Panel Web Server is configured with a private IP

address on a VLAN, rather than a public (Internet) IP

address).

If the BACnet Field Panel Web Server is configured

with a public address, there is a potential security risk

to the system integrity from unauthorized access. You

must consult the IT department responsible for the

system before configuring the BACnet Field Panel

Web Server with a public address.

Summary of content (6 pages)

PAGE 1
Technical Specification Sheet Document No. 149-1000 July 30, 2018 BACnet Field Panel Web Server with Application MC and Kiosk Mode Graphics The Web Server takes advantage of the multitasking PXC controllers, eliminating the need for separate high-cost “Web appliances” or dedicated Web servers.
PAGE 2
Browser/Client Requirements Application MC allows you to: • Session cookies enabled ⚫ • Adobe Flash Player Plug-in 16.0 or later installed View the FLN MS/TP devices which have been added to the host field panel. ⚫ Monitor the current value of application points using a feature rich graphical interface. ⚫ Make changes to commandable points using the displayed graphic. ⚫ View and acknowledge alarms. ⚫ Manage Flow Balancing settings for VAV applications.
PAGE 3
Network Layout System Status Bar • Visual indication of new alarms and unacknowledged alarms • Visual indication of out of service, faults, and failed devices Alarm Status and Acknowledgement • Ability to view, filter, and acknowledge system alarms from a single page • Remote notification of alarm status Point Commanding • View network layout • View BACnet MS/TP FLNs • Navigate to other Web-enabled panels • Search database for individual points • Change point values and priorities • Pl
PAGE 4
Reporting Totalization The Point Commander and Point Editor supports totalization for analog and multistate points. The totalization function accumulates the runtime value of a point. Examples for using this feature include: • Accumulating runtime for fans and pumps. • Accumulating total volume from a flow rate sensor. Calculating degree days.
PAGE 5
o o • • • View program point values in real time through the Referenced Points list View disabled, unresolved, and comment lines FLN Devices o Add/Modify/Delete FLN Devices on multiple FLN types o Set and Release TEC Initial values User Account o Add/Modify/Delete user accounts o Change user passwords Panel Configuration o Configure/Edit IP and devices BACnet settings o Configure Sub network communication settings o Configure/Edit node table list for peer to peer communications Graphics Crea
PAGE 6
Specifications Supported BACnet Field Panels BACnet IP-based PXC Modular BACnet IP-based PXC Compact 16/24/36 NOTE: At least one PXC Modular or PXC 36 is required on each network. Internet Explorer 6.0 or later, or Firefox 3.6 or later browser, with cookies enabled, and capable of running and displaying Adobe Flash Player Plug-in 10.1 or later.