Data Sheet for Product

Technical Specification Sheet
Document No. 149-972
June 11, 2010
Siemens Industry, Inc. Page 1 of 2
Pneumatic Assembly
and Door Option Kits
Description
The Pneumatic Kits with AO-P Transducers are
designed to install on the SCU enclosure door, MBC40
or MBC24 using the Extension door, or inside any
auxiliary enclosure. The kits efficiently utilize the space
within the enclosures and reduce the time and cost for
piping and wiring.
The pneumatic kit is available in two configurations
with four or eight Fail-Safe, AO-P Transducers that are
already mounted, wired and piped on a backplane.
Power is provided to the assembly by an integrated
cable that is connected to the service box auxiliary
outlet supplied within the enclosure. Termination
blocks at each installed AO-P Transducer distribute
power and signal for 0 to 10 Vdc input. HAND contact
and 0 to 5 Vdc. Feedback Signals are also terminated
to provide for optional use.
Small and large door panel options with only power
cord, termination and wire management are available.
For more information about the AO-P Transducers,
see the Electric to Pneumatic Transducer and
Enclosures Technical Specification Sheet
(149-277P25).
Features
 Small and Large perforated backplane available
for mounting devices
 Small perforated backplane pre-configured with
four AO-P Transducers already mounted, wired
and piped. Includes one supply line.
 Large perforated backplane pre-configured with
eight AO-P Transducers already mounted, wired
and piped. Includes two supply lines with T
connector.
 Wire management
 Power cable and termination routes Class 2
limited, 24 Vac power from the auxiliary outlet on
the service box supplied with Migration Kit
 SCU enclosure door will allow:
 One large (8 AO-P)
 One small (4 AO-P) (mounting studs do not
accommodate two small)
 MBC34 Extension door will allow:
 One large plus one small (12 AO-P)
 Three small (12 AO-P)
 MBC24 Extension door will allow:
 One large (8 AO-P)
 Two small (8 AO-P)