Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers

Technical Specification Sheet

Rev. 13, November 2005

Document No. 149-344P25 Page 1 of 8

Power Modular Equipment Controller

Figure 1. Power Modular Equipment Controller.

Description

The Power Modular Equipment Controller family of

field panel and point expansion products is an integral

part of the APOGEE® Automation System. They are

high performance, modular Direct Digital Control

(DDC) supervisory equipment controllers. They

operate stand-alone or networked to perform complex

control, monitoring and energy management functions

without relying on a higher-level processor. Power

MECs communicate with other field panels or

workstations on a peer-to-peer Automation Level

Network (ALN) or with an optional remote connection

to a central console. The ALN may either be P2 or

optional TCP/IP protocol. The Power MEC can

optionally provide central monitoring and control for

distributed Field Level Network (FLN) devices. The

FLN may either be P1 or LonTalk® protocol.

Features

• Several levels of controllers to match application

requirements

• Remote mounted external analog and digital point

expansion modules for added point expansion

which may be independently operated as FLN

devices or directly controlled on an optional point

expansion bus

• Proven program sequences to match equipment

control applications

• Sophisticated Adaptive Control, a closed loop

control algorithm that auto-adjusts to compensate

for load/seasonal changes

• Built-in energy management applications and

DDC programs for complete facility management

• Comprehensive alarm management, historical

data trend collection, operator control and

monitoring functions

• Message control for terminals, printers, pagers

and workstations

• Option with Hands Off Auto (HOA) switches

• Option for compatibility with LonWorks® networks

• Option for peer-to-peer communications over

industry standard 10/100 Base-T TCP/IP

networks.

Summary of content (8 pages)

PAGE 1
Technical Specification Sheet Rev.
PAGE 2
DIGITAL INPUT CONNECTORS C 57 DO25 NO 58 NC 59 C 60 DO26 NO 61 NC 62 C 63 DO27 NO 64 NC 65 0A C 66 A DO28 NO 67 NC 68 0A C 69 A DO29 NO 70 NC 71 0A C 72 DO30 NO 73 0A NC 74 C 75 DO31 NO 76 0 NC 77 A C 78 DO32 NO 79 NC 80 0 DI1 21 DI2 43 DI3 65 HOA LED DI4 87 9 10 DI5 11 12 DI6 13 14 DI7 15 16 DI8 A ANALOG OUTPUT CONNECTORS A 25 + 17 + AO13 26 AO9 18 27 A+ 19 + AO14 28 AO10 20 29 + 21 + AO15 30 AAO11 22 31 + 23 + AO16 32 AO12 24 - 24 VDC SENSOR POWER SHIELD TERMINATION A A HOA CONTROL SWITCHES
PAGE 3
Status LEDs indicate 24 Vac supplied from the power supply and 24 Vdc supplied to the input/output point board. • Controller Board The controller board is a microprocessor-based multitasking platform for program execution and communications with the I/O point board and with other Power MECs and field panels over the ALN. The 12xx and 13xx controllers can also support analog or digital point expansion modules, which provide for point expansion capability to match the application requirements.
PAGE 4
Figure 5. Analog and Digital Point Expansion Modules. Figure 4. Power Modular Equipment Controller service box. Analog and Digital Point Expansion Modules In addition to the points on the input/output board, the 12xx and 13xx Power MECs support analog and digital Point Expansion Modules. The controller can support a maximum of any combination of eight modules. They can be mounted next to or remote from the controller depending upon the job requirements.
PAGE 5
operators may also access the controller through concurrent Telnet sessions and/or local operator terminal ports.
PAGE 6
Specifications Processor – Motorola MPC 1xxx, 1xxxE 1xxxF, 1xxxEF, 1xxxL, 1xxxEL Processor Clock Speed Memory 1xxx, 1xxxE, 1xxxF, 1xxxL 1xxxEF, 1xxxEL Battery Backup of RAM (field Replaceable) AA Alkaline Network Communication: Automation Level Network Field Level Network Point Expansion Bus A/D Resolution (analog in) D/A Resolution (analog out) Local Communication Interface Voltage Requirements Service Box, 115V Service Box, 230V Controller or Expansion Module Power Consumption Power Modular Equipment C
PAGE 7
Ordering Information Controller Range Description Product Number Power MEC 1100, 8DI, 8DO, 8AI, 8AO, HOA-ready Power MEC 1101, 16DI, 4DO, 8AI, 4AO Power MEC 1110, 8DI, 8DO, 8AI, 8AO with HOA Power MEC 1200, 8DI, 8DO, 8AI, 8AO, point expansion support, HOA-ready Power MEC 1201, 16DI, 4DO, 8AI, 4AO Power MEC 1210, 8DI, 8DO, 8AI, 8AO, point expansion support, with HOA Power MEC 1300, 8DI, 8DO, 8AI, 8AO, point expansion support, modem, HOA-ready Power MEC 1310, 8DI, 8DO, 8AI, 8AO, point expansion support, mod
PAGE 8
Accessories Description Product Number Modem Cable (DB25 male to RJ-45 8-pin) for hardware flow control of autodial (Dial-up) modem MMI Extension Cable, (RJ-11 male to female) for printers or terminals outside of enclosure Lithium Battery (10/pkg.) for Models 100, 101, 110, 200, 201, 210, 300, 310 MMI Cable (DB9 female to RJ-11 6-pin) for no flow control operator interface connections U.S. Robotics Sportster 56K bps, Dial-up, Fax, V.