BACnet Field Panel Web Server Quick Start Guide Building Technologies 2017-06-30 125-3585, Rev.
BACnet Field Panel Web Server Browser Requirements BACnet Field Panel Web Server Welcome to BACnet Field Panel Web Server, a field panel product that provides a Web-based user interface to the APOGEE® Automation System. BACnet Field Panel Web Server is an Adobe Flash application that can interact with BACnet field panels that use Firmware 3.2.2 or later and have the Web Services option enabled. The BACnet Field Panel Web Services license enables field panel data access over http.
BACnet Field Panel Web Server Loading and Upgrading the User Interface Be sure that the Field Panel Web Services license LSM-FPWEBPLHST or LSMFPWEBPL enabled for each field panel that will be accessing FIN Builder graphics. When you log in using either of the default accounts (“high/high” or “med/med”), you are immediately prompted to change the password to something other than high or med. NOTE: It is recommended that you change the default password before loading or upgrading the User Interface files.
BACnet Field Panel Web Server Connecting to the Web Server 2. Insert the USB memory device into the USB port of the field panel. NOTE: Due to USB memory device manufacturer, size, and contents, the time to detect the device will vary from several seconds to one or more minutes. You may verify that the device is attached by using the HMI commands S, H, F, F, L to list the available drives on the field panel, and confirm that Drive B is listed. 3.
BACnet Field Panel Web Server Logoff NOTE: Auto Save is enabled by default. It is recommended that you leave the Auto Save feature enabled to ensure that the field panel database is backed up. For more information about Auto Save, see the APOGEE BACnet ALN Field Panel User's Manual (125-3020). Logoff You can end a BACnet Field Panel Web Server session by manually logging off or by allowing the system to automatically log off.
