Operating Instructions

How to Use This Manual
This manual is written for the owner and user of the Siemens Building Technologies, Inc.
Heat Pump Controller—Multi-Stage, often referred to as
controller for the remainder of this
manual
. This manual is designed to help you become familiar with the controller and its
applications.
This chapter covers manual organization, manual symbols and conventions used in the
manual, and how to access help.
Manual Organization
This manual contains the following chapters:
•
•
•
•
•
•
Chapter 1 Product Overview, describes the hardware components and accessories
used with the controller.
Chapter 2 Applications, describes the control applications available in the controller.
Chapter 3 Point Database, defines the point database descriptors and includes
addresses and applications.
Chapter 4 Troubleshooting, describes basic corrective measures to take should you
encounter a problem when using this controller. For issues not covered in this
chapter, contact your local Siemens Building Technologies representative.
A Glossary describes the terms and acronyms used in this manual.
An Index is provided to assist you in finding information.
Manual Conventions
The following table lists conventions used in this manual.
Convention Example
Actions that you should
perform are specified in
boldface font.
Type F for Field panels.
Click OK to save changes and close the dialog box.
Error and system
messages are displayed
in Courier New font.
The message Report Definition successfully renamed
appears in the status bar.
New terms appearing for
the first time are
italicized.
The Open Processor continuously executes a user-defined set of
instructions called the control program.
V