Data Sheet for Product

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company names
mentioned herein may be the trademarks of their respective owners. ©2010 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
Your feedback is important to us. If you have
comments about this document, please send them to
[e-mail]
.
Document No. 149-491
Printed in the USA
Page 2 of 2
For more information about the PXC Compact, see the PXC Compact Technical Specification Sheet (149-172).
For more information about the P1 Bus Interface Module with TX-I/O, see the TX-IO Product Range Technical
Specification Sheet (149-476).
Specifications
Agency Listings UL 864 UUKL
ULC-C100
UL 916 PAZX
CSA 22.2 No. 205
FCC, CE. C-tick
Backplane Dimensions (not including wire tie bars)
12.75” H × 10.5” W × 0.375" D
(324 mm × 267 mm × 9.5 mm)
Ordering Information
Description Part Number
UC or FLNC to DIN Migration Kit includes perforated backplane with
ground, power wires, wire tie bars, mounting hardware and DIN rail.
PXA-UCKIT
Accessory kit with four 16” (406 mm) DIN rails. PXA-DIN16KIT
Accessory kit with four small and four large tie bars. PXA-TIEBAR
DIN Rail Wire Extender Kit. Includes eight terminal blocks, ten position
unprinted labels, seven plug-in jumpers and one end cap.
545-207
MMI extension cable.
545-712
Non-DO Wire Extender Kit. Includes eight 12” (305 mm), 18 AWG
Shielded Twisted Pair pre-stripped wires connected to 3-position Molex
terminal blocks for DI, AI and AO wire extensions.
545-157