Installation Instructions

Document No. 550-810
Installation Instructions
November, 2003
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. OpenAir is a trademark of Siemens Building Technologies, Inc. Other product or company names mentioned
herein may be the trademarks of their respective owners. © 2003 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you have
comments about this document, please send
them to [e-mail]
Document No. 550-810
Printed in the U.S.A.
Page 4 of 4
WARNING:
Installations requiring
Conformance
• All wiring for CE rated actuators must be
Separated Extra Low Voltage (SELV) or
Protective Extra Low Voltage (PELV) per
HD384-4-41.
• Use safety-isolating transformers (Class III
transformer) per EN 61558. They must be
rated for 100% duty cycle.
• Over current protection for supply lines is
maximum 4A.
Dimensions
C H E
90
90
4
5
AMP
TEC0443R1
+
-
S
.156
(4)
3.437
(87)
5.368
(136.35)
90
˚
min. 6 inch
152.4 mm
.937
(94)
min.
4 inch
101.6 mm
.4375
(11)
min. 4 inch
100 mm
.0312
(0.8)
5.574
(141.58)
2.677
(68)
min.
.25 inch
6 mm
min. 8 inch
203.2 mm
4.189
(106.39)
min. .375 inch
10 mm
.8126
(21)
2.948
(74.88)
1 2 3 4 5 6
DO3
C
DO4
AI3
C
AI4
Figure 12. Dimensions of the ATEC.