Data Sheet for Product

5
Siemens
Datasheet
A6V10959858_en
Smart Infrasructure
2020-07-30
Mounting
The mounting plate is designed for the fume hoods with or without existing cutouts.
● designed for fume hood or wall-mounting. A conduit box is optional (A).
● base plate (B) has screw holes for all commercially available conduit boxes. The height of
the screw heads must not exceed 3 mm.
● ODP device (C).
Installation
● For KNX PL-Link wiring (topology, allowed cables and cable length), see the Desigo TRA
installation guide, CM111043.
● Use the correct cables for the KNX PL-Link bus
● Do not interchange the wires of the KNX PL-Link cable.
– The red terminal is for KNX PL-Link
+
– The gray terminal is for KNX PL-Link
–
● Observe all local installation regulations.
CAUTION
The devices are not protected against accidental connection to AC 230 V.