Operating Instructions
Table Of Contents
- Table of Contents
- How To Use This Manual
- Chapter 1—Hardware
- Chapter 2—Applications for ATEC— Base VAV
- Chapter 3—Applications for ATEC—VAV with Reheat
- Chapter Overview
- Introduction
- Application 2500: VAV Cooling Only
- Application 2501: VAV Cooling or Heating
- Application 2522: VAV with Electric Reheat or Baseboard Radiation
- Application 2523: VAV with Hot Water Reheat (only one reheat valve)
- Application 2524: VAV Series Fan Powered with One Stage of Electric Reheat
- Application 2526: VAV Parallel Fan Powered with One Stage of Electric Reheat
- Application 2473: Slave Mode
- Chapter 4—Point Database
- Chapter 5—Troubleshooting
- Glossary
- Index
Glossary
Siemens Building Technologies, Inc. Glossary-5
stand-alone control
Type of control offered by a controller that is providing independent DDC control to a space.
Terminal Equipment Controller
Siemens Building Technologies, Inc., product family of equipment controllers (one is the
Actuating Terminal Equipment Controller—Electronic Output) that house the applications
software used to control terminal units, such as heat pumps, VAV terminal boxes, fan coil
units, unit ventilators, etc.
unbundle
Term used to describe the entering of a point that resides in a controller's database into the
field panel's database so that it can be monitored at and/or controlled from the field panel.
VAV
Variable air volume. Ventilation system that changes the amount of air supplied to and
exhausted from the rooms served. The specific quantity of air supplied to various rooms is
automatically adjusted to accommodate heating, cooling, or ventilation needs of the zone at a
given point in time.