Basic Documentation

33 / 44
Siemens Flush-mount room sensors AQR253... AQR257... CE1P1411en
Building Technologies GAMMA building management systems 2013-04-17
6.4.9 Binary inputs
Base module AQR2570 / AQR2576
6.4.9.1 General settings
Designation Values Description
Assignment of inputs Individual
Combined
Use of binary inputs individually or combined.
Input 1/2 ---
2-button switching
2-button dimming
2-button blinds
Function of dual buttons on binary inputs 1 and 2 at
combined function for both inputs.
Activate blocking object for inputs 1/2 Yes
No
If the input is blocked (blocking object = 1), state
changes for this input no longer are evaluated.
Input 1 ---
1-button switching / send value
1-button dimming
1-button blinds
Contact
Function of the button on binary input 1 (at one function
per input)
Activate blocking object for input 1 Yes
No
If the input is blocked (blocking object = 1), state
changes for this input no longer are evaluated.
Input 2 ---
1-button switching / send value
1-button dimming
1-button blinds
Contact
Function of the button on binary input 2 (at one function
per input)
Activate blocking object for input 2 Yes
No
If the input is blocked (blocking object = 1), state
changes for this input no longer are evaluated.
6.4.9.2 Inputs 1/2, 2-button functions
When function is combined for both inputs.
Designation Values Description
Type of contact Normally open
Normally closed
Contact status.
Long keypress 0.5 sec
0.6 sec
0.8 sec
1.0 sec
1.2 sec
1.5 sec
2.0 sec
2.5 sec
3.0 sec
4.0 sec
5.0 sec
6.0 sec
7.0 sec
Definition of the duration of a keypress, to differentiate
between short and long keypress.
Action button 1, 2 On, off
Off, on
Button function for 2-button switching.
Action button 1, 2 short/long keypress On/brighter, off/darker;
Off/darker, on/brighter
Button function for 2-button dimming.
Action button 1, 2 short/long keypress Step/up, step/down
Step/down, step/up
Button function for 2-button blinds.