Operation Manual

Component Description
(1) Battery release latch Releases the battery from the battery bay.
(2) Docking connector Connects an optional docking device.
(3) Bottom cover release latch Releases or locks the bottom cover.
(4) SIM slot Contains a wireless subscriber identity module (SIM). The
SIM slot is located inside the battery bay.
(5) Battery bay Holds the battery.
(6) Vents (3) Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(7) Speake
rs (2)
(8) Bluetooth compartment
(9) Wireless a
nd memory module
compartments and hard drive bay
(10) Accessory battery connector
Produce sound.
Contains a Bluetooth device.
Hold a n HP Mobile Broadband Module, the memory
modules, and the hard drive.
NOTE: To p revent an unresponsive system, replace the
wireless module only with a wireless module authorized for
use in the computer by the governmental agency that
regulates wireless devices in your country or region. If you
replace the module and then receive a warning message,
remove the module to restore computer functionality, and
then contact technical support through Help and Support.
Connects an optional accessory battery.
20 Chapter 2 Getting to know your computer