User Manual
Table Of Contents
- 1 About this documentation
- 2 Engineering
- 3 Handling
- 4 Functions and control
- 4.1 3-position control
- 4.2 Modulating control
- 4.3 Function module AZX61.1
- 4.4 Positioning signal and flow characteristic selection
- 4.5 Acting direction and flow characteristic
- 4.6 Position Feedback U
- 4.7 Calibration
- 4.8 Signal priorities
- 4.9 Detection of valve seat
- 4.10 Detection of foreign bodies
- 4.11 Forced control Z
- 4.12 Technical and mechanical design
- 5 Technical data
- 6 Connection diagrams and dimensions
- 7 Revision numbers
- 8 Glossary
• First, observe "Special notes on mounting" (page 24).
Plug-in sp
ace B
• First, fit th
e screw covers – otherwise danger of life!
1
2
3
4
No.: 1
5
Adjust switch position (refer also to "Manual operation" page 46)
6
No.: 1
When initial situation: 0 Ω
When initial situation: Ω
7
Observe "Wiring" (page 30)
8
Observe "Connection terminals" (page 53)
28 / 60
Siemens Actuators SAX.., SAL.. for valves CE1P4040en
Building Technologies Handling 22.12.2010