User Manual

12/13
Building Technologies CC1N7814en
02.02.2018
Terminating resistor
At the end of the serial bus cabling, a terminating resistor must be fitted.
For that purpose, a jumper must be set to BUS TERMINATION on the last actuator of
the bus cable, which will activate the resistor.
On all the other actuators, that jumper must be set to the other position (deactivated).
Addressing button
12VAC1 12VAC2 CANH CANL GND
X1
7814z01e/1002
LED (function code)
Jumper
X2
Bus
termination
12VAC1 12VAC2 CANH CANL GND
Assignment of terminals
The 2 terminal blocks (X1 and X2) are identical.