User Manual

EPD - Type II
Based on ISO 14021
Building Parts
ASR70 Accessories
PTC Conductive Heating Elements
Product line, product range
Siemens Schweiz AG
Building Products
Theilerstrasse 1a
CH-6300 Zug
Management System since by
ISO 14001 (Environment) 20.10.1998 SQS
ISO 9001 (Quality) 22.07.1986 SQS
Maintenance
Fire load 2MJ
4-LDPE Low density polyethylene plastic bag 7g
Paper Installation Instruction 10g
Notes on disposal
Total weight of device 143g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Q Silicone rubber Cable compl. 97g
Al alloy Extruded section 17g
Al Contact latch 2g
Ceramic PTC-Thermistors 3g
Steel stainless Cable anchorage 8g
Steel; lacquered Foldback clips 15g
Aluminiumoxid; Ceramic thermal conducting foil 3g
Comments
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to
Annex II in 2015.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate substances, which will become known at a later date, are listed on
the delivery note.
Regulation (EC) No. 1907/2006 (REACH)
The device should not be disposed of as unsorted municipal waste. The special treatment for specific components may
be mandated by law or ecologically sensible.
Observe all local and applicable laws.
Materials
Packaging
Disposal
MVL661.., MVS661..N (S55845-Z241)
One-way, recyclable
Environmental
Product Declaration
Type of equipment /
Product No.
Not necessary
Product
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Plastics
Restricted Page 1/2