User's Manual

For Operation in the Control Cabinet
SIRIUS 3RA6 Compact Starters
Accessories
6/46
SIRIUS Innovations Supplement 2011
Illustrations are approximate
6
1)
10-pole connection cables are required for EMERGENCY-STOP group
concepts.
2)
Is included in the scope of supply of the SIRIUS 3RA6 compact starter in
IO-Link version.
Version Order No. PU
(UNIT,
SET, M)
PS* Weight
approx.
kg
Accessories for 3RA6 compact starters (continued)
3RA69 20-3A
Main circuit terminals for mixed connection
method
One set comprises:
• 1 joint block on the line side for the screw con-
nection method
• 1 joint block on the motor side for the spring-
type connection method
3RA69 20-3A 1 1 unit 0.044
Version Order No. PU
(UNIT,
SET, M)
PS* Weight
approx.
kg
Accessories specifically for 3RA64, 3RA65 compact starters
with IO-Link
3RA69 31-0A
Additional connection cables (flat) for side-
by-side mounting of up to 4 compact starters
• 10-pole
- 8 mm
1)
3RA69 32-0A 1 5 units 0.007
- 200 mm
1)
3RA69 33-0B 1 5 units 0.012
• 14-pole
- 8 mm
2)
3RA69 31-0A 1 5 units 0.007
- 200 mm
3RA69 33-0C 1 5 units 0.014
3RA69 35-0A
Operator panels
(incl. enabling block, blanking cover and
assembly bracket)
3RA69 35-0A 1 1 unit 0.052
Enabling block
3RA69 36-0A 1 1 unit 0.002
Blanking covers
3RA69 36-0B 1 5 units 0.001
Connection cable (round) for connecting the
operator panel
10-pole, 2000 mm
3RA69 33-0A 1 1 unit 0.114
3RK1 005-0LB00-0AA0
SIRIUS 4SI solid-state modules
IO-Link master for connection of up to
4 SIRIUS controls (max. 16 in groups of 4) with
IO-Link (3-wire connection) to
SIMATIC ET 200S,
width 15 mm,
supports firmware update
(STEP 7 V5.4 SP5 and higher)
Can be used with the following terminal
modules:
• TM-E15S26-A1 (screw terminals)
• TM-E15C26-A1 (spring-type terminals)
• TM-E15N26-A1 (Fast Connect)
3RK1 005-0LB00-0AA0 1 1 unit 0.057
Version Order No. PU
(UNIT,
SET, M)
PS* Weight
approx.
kg
Terminal blocks and phase barriers for
"Self-Protected Combination
Motor Controllers (Type E)" according to UL 508
3RV29 28-1H
Note:
UL 508 demands 1-inch clearance and 2-inch creepage distance on the line side for "Combination Motor Controller Type E".
The following terminal blocks or phase barriers must be used in 3RV20 motor starter protectors.
The terminal blocks or phase barriers cannot be used in combination with the 3RV19 .5 three-phase busbars.
For construction with three-phase busbars, see "Busbar accessories".
Terminal blocks type E
For extended clearance and
creepage distances
(1 and 2 inch)
S00, S0
3RV29 28-1H 1 1 unit 0.065
* You can order this quantity or a multiple thereof.
© Siemens AG 2011