User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
• Accept the selection
• Check/uncheck the item (if a radio button or a check box is displayed in front of the item)
To go back to the previous menu level the left button has to be pressed.
2.1.6Speaker
The speaker of the AyTerminal is used for GSM voice calls and for providing an acoustic feedback.
For the following use cases an acoustic feedback is provided:
• On navigation button click
• On AyApplication specific triggering of a predefined alarm tone/ ring tone
• On AyApplication specific triggering of predefined acknowledgment tones
• On Incoming voice calls with predefined ring tones
2.1.6.1Acknowledgment tones
There are positive and negative acknowledgment tones. One beep indicates a positive
acknowledgment, three beeps a negative acknowledgment. The table below lists acknowledgment
use cases
Event
Positive
(one beep)
Negative
(two beeps)
FW download Yes, download accepted No, download rejected
To many AySnapOns No Yes
Entering PIN Yes, successfully No, incorrect PIN
Entering PUK Yes, successfully No, incorrect PUK
New AySnapOn connected,
Search item selected
Yes, found No, not found
Table 2-3 Positive and negative acknowledgment for some events
2.1.6.2Ring tones
There are 7 available ring tones which can be used in AyApplications. With AyCare application
these ring tones can just be played from Settings/ Audio/ Ring tones.
2.1.6.3Alarm tone
Alarm tone is an internal alarm which is used in AyCare for playing siren in case of alarm (if the
mode is defined so).
2.1.7Microphone
The microphone is used for the GSM voice call or as noise sensor.
2.1.83D-Ego-motion sensor
The ego-motion sensor is used to detect AyTerminal movement.
2.1.9Temperature sensor
The temperature sensor provides the information about the AyTerminal environmental
temperature. The temperature range is defined by the operating range of AyTerminal with a
temperature-accuracy of +/-1,5°C @ 30°C without charger connected and OLED display off. In
case of a connected charger (OLED display always on), the internal temperature of the AyTerminal
will rise due to the charging process. The AyTerminal will counterbalance this internal heating but
Page 11 / 50