User's Manual

AyTerminal User Manual for AyCare
Contents V2.1
3Installation and startup
3.1Installation
Remove the battery cover by pressing the Release button (see Figure 2-3). Slide the SIM card into
its holder. Make sure that the gold contacts of the SIM are facing down and the cut off corner is
correctly aligned. Insert the battery side way into the AyTerminal and then press it downwards until
it clicks into position. Place the battery cover back.
3.2Startup
Press the central button of the device for at least 2 seconds in order to turn on the AyTerminal. A
correct startup is indicated by the LED blinking green and a simple animation is shown on the
display Figure 3-8.
Figure 3-8 AyTerminal simple animation
3.2.1Loading screen
In a few seconds after the LED is ON the AyTerminal loading screen will be displayed, as
presented in Figure 3-9.
loading
...
...
loading
Figure 3-9 AyTerminal loading screen – standard and jumbo mode
3.2.2Emergency call mode
During AyTerminal startup, if there is no SIM card inserted or the inserted SIM card is not locked to
the AyTerminal, only the following menu will be available:
Turn OFF
Emergency call
Figure 3-10 AyTerminal emergency call menu structure
Choosing the emergency call item by pressing the accept button, an emergency call is initiated.
The GSM mobile phone standard includes 112 as emergency number. In countries where 112 is
not the standard emergency phone number the emergency call will be redirected to the local
emergency phone number, if it exists.
Page 14 / 50