User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
Emergency call
Turn off
Emergenc
Turn off
Figure 3-11 Emergency call menu – standard and jumbo mode
3.2.3PIN/PUK input
If the SIM card was inserted correctly and the SIM PIN control is enabled the following screen will
be shown. The selected digit can be changed by using the up/down navigation buttons (digit range
is from 0 to 9). The PIN is requested to have between 4 and 8 digits. Because of this constraint the
OK option is shown and can be selected after the 4th digit was inserted.
***_
Enter PIN
9
2
1
0
***_
9
1
0
Enter PIN
Figure 3-12 PIN input screen – standard and jumbo mode
If the entered PIN is incorrect, then a message like in Figure 3-13 is displayed.
Incorrect PIN.
Try again!
<n> tries left.
Incorrect
PIN. Try
again! 2
tries left.
Figure 3-13 Incorrect PIN – standard and jumbo mode
If the PIN is entered false for 3 times then the PUK is required (see Figure 3-14). The PUK number
of digits is fixed to 8 digits. After entering the PUK the PIN will be set to “1234” and a message is
shown informing about the change of PIN. For changing the PIN please see chapter 4.8.7.3. If the
PUK is incorrect then a similar message like for a wrong PIN will be displayed.
***_
Enter PUK
9
2
1
0
The PIN is set to
1234.
Figure 3-14 PUK input screen – standard screen
***_
9
1
0
Enter PUK
The PIN is
set to 1234.
Page 15 / 50