User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
4AyCare application
The AyCare application has three modes (see chapter 4.2 for more details). Each mode has its
own menu and functionality. Different notifiers can be chosen for each mode:
• Sending an SMS to a defined number
• Establishing a voice call to a defined number
• Informing the AyServer via GPRS
• Playing a siren using the AyTerminal loudspeaker.
Not all the notification types are available for each mode.
A mode can be configured by activating/deactivating or changing the configurable values of alarm
notifiers or alarms triggers and store them in the non-volatile memory.
These settings can be set locally via the AyTerminal menu or can be received from the AyServer,
synchronized via the AyServer interface.
This document describes the user interface displayed on the AyTerminal OLED display. The
described user interface is used to configure the AyCare modes.
Overall the AyCare AyApplication, when an alarm is triggered the status LED is blinking
orange/black with frequency of 3 Hz until the mode is deactivated or the alarm duration time has
expired. An alarm can be triggered only if a mode is started and active.
For one of the modes an activation period of time can be defined. Time period is on a daily basis,
and it’s telling when a certain mode will be activated (e.g.: For mode “Tracking mode” the activation
time is activated and set to start at 11:30 and end at 22:30).
Also one of the modes can be set to start automatically when AyCare starts.
Page 17 / 50