User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
4.2Modes description
All modes provide a similar menu structure. Navigation through menu structure is described in
chapter 2.1.5.1.
4.2.1Voice Call
This mode is used to establish a voice call to one defined phone number by pressing the central
button for minimum 2 seconds. In case there is only one phone number specified the VoiceCall will
be established automatically. If user specified more then one number, menu with saved numbers
will appear. One of the displayed phone numbers can be selected by using the up/down buttons
and then pressing the right/OK (accept) button. By default there will be no phone number defined.
If not at least one phone number has been defined, on pressing long the central button for
establishing a phone call a message will be displayed: “No phone number specified”. Calls can
only be established after defining the phone number to be dialled. Hanging up the call can be done
by pressing long (at least 2s) the central button.
4.2.2Panic Button
This mode can be used to establish a call to one defined phone number by pressing the central
button for at least 2 seconds. By default there is no phone number defined, so a call can only be
established after the phone number has been defined. Hanging up the call can be done by
pressing long (>2s) the central button.
4.2.3Baby Phone
This mode has the following functions:
• The AyTerminal can receive voice calls from a defined list of phone numbers. By default
this list is empty. To be able to use this feature (Listen-In) at least one phone number must
be defined before starting the mode. After the call is established it is possible to listen in
where the AyTerminal was placed (e.g. in the nursery – to hear what the child is doing).
• A call from a non-defined number will be rejected.
• The mode triggers an alarm if a defined (or default) noise level has been exceeded.
• If “Baby Phone” mode is active there is no button click activated (only "flash" indication
when pressing a button). This is planned so because e.g. baby will not been waken up
when pressing deactivation code.
4.2.4AyCare mode specific settings
configurable
value
description
format &
restrictions
default
value
Auto start flag if mode is
enabled to
automatically
start-up
Boolean
false – disabled
true – enabled
false
Activation time
active
flag if mode is
enabled to
automatically be
activated
Boolean
false – disabled
true – enabled
false
Activation start
time
time that
activates the
mode
Time format is
24h. hh:mm:ss
00:00
Activation end time that Time format is 12:00
Page 19 / 50