User's Manual

AyTerminal User Manual for AyCare
Contents V2.1
4.4.3.1SMS
The SMS data are: the phone number and the message text. The message text can not be
defined/ modified by the user on the AyTerminal. A default value for the SMS text of each mode is
defined, and can be changed only using the web GUI. The new SMS text is received from the
AyServer during synchronization. The default values for SMS text are defined in Figure 4-18
AyCare mode specific settings.
This notifier can be activated or deactivated. The phone number can also be changed.
If the highlighted item is “Active” then pressing the OK button (right button) checks or unchecks the
item.
If the highlighted item is “<phone number>” then pressing the OK button (right button) gives the
possibility to edit the phone number.
Pressing the Back button (left button) leads to the previous screen (Notifiers menu).
<Enter Nr .>
Active
SMS
+385000...
SMS
Active
Figure 4-29 SMS setup menu
As mentioned before, for the SMS notifier the phone number can be defined or changed. In this
case an input control is displayed like in Figure 4-30. If the phone number is not defined then in the
menu will appear “<Enter Nr.>”.
+385316_
Phone number
OK
1
0
+
+385_
Phone num
OK
0
+
Figure 4-30 Set phone number screen
The available characters are: + and 0…9.
By using the up/down navigation buttons it is possible to browse the digits, select them or select
OK. For adding a new digit it has to be selected first, and then the Enter navigation button has to
be pressed. To delete the last inserted digit use the left navigation button. When no digit is
available in the input area, press the Back button (left button) to cancel the editor and to display
the previous screen.
To save the set value select the OK option and then press the OK button (right button).
If the phone number is not in international format then a message is shown and the editor is
displayed again.
Only one phone number can be defined for SMS notification.
No acknowledgment tone will be played in the above screen.
4.4.3.2Voice Call
This notifier can be activated or deactivated. The phone number to be dialled can be changed. The
phone number must be in international format.
Page 30 / 50