User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
If the highlighted item is “Active” then pressing the OK button (right button) checks or unchecks the
item.
If the highlighted item is “<phone number>” then pressing the OK button (right button) gives the
possibility to edit the phone number.
Pressing the back button (left button) of the device leads to the previous screen (Notifiers menu).
<Enter Nr .>
Active
Voice call
+385000...
Voice Call
Active
Figure 4-31 Voice Call setup menu
The phone number can be added or modified on a one line editor screen (see Figure 4-32). If the
phone number is not defined then in the menu will appear “<Enter Nr.>”.
+385316_
Phone number
OK
1
0
+
+385_
Phone num
OK
0
+
Figure 4-32 Set phone number screen
The available characters are: + and 0…9.
By using the up/down navigation buttons you can browse the displayed digits, select them or select
OK. To add a new digit select it and press the OK button (right button). To delete the last inserted
digit use the Back button (left button). When no digit is available in the input area, press the Back
button (left button) to cancel the editor and to display the previous screen.
To save the set value select the OK option and then press the OK button (right button).
If the phone number is not in international format then a message is shown and the editor is
displayed again.
Only one phone number can be defined for Voice Call notification.
No acknowledgment tone will be played in the two screens above.
An established Voice Call can be ended by pressing long the central button (at least 2s).
4.4.3.3AyServer
This notifier can be activated or deactivated. If the AyServer option is checked then an alert will be
sent to the AyServer when an alarm is triggered. This item is only available if the AyTerminal is
registered to the AyServer and the initial SMS was received from the AyServer. When the item is
not available the AyServer text appears strikethrough.
Activating or deactivating the AyServer as notifier is done by checking or un-checking the option in
the “Notifiers” menu (see Figure 4-28). To check or uncheck the AyServer item, select it and press
the OK button (right button).
Page 31 / 50