User's Manual

AyTerminal User Manual for AyCare
Contents V2.1
Notifiers
SMS
Voice Call
AyServer
SMS
Voice Call
Notifiers
AyServe
Figure 4-33 AyServer available case
4.4.4Triggers / Phone number
Each mode has its own list of alarm triggers and each one can be configured independently.
At least one trigger has to be activated. If no trigger is activated then the mode can’t be started.
Each trigger can be activated or deactivated or its defined parameter values can be changed.
Each trigger has its own list of parameters to be set. At least one alarm trigger has to be activated.
Note: If a trigger is the only one for a mode then in the trigger’s setup menu the “Active” option is
missing and the trigger will be automatically activated.
The modes “Voice Call” and “Panic Button” have no triggers; instead of the “Triggers” menu the
“Phone numbers” menu item is displayed.
Only Baby Phone have trrigers:
Possible actions are:
• Navigating through the items using the up/down buttons.
• Selecting the highlighted item using the OK button (right button).
• Going back to the previous screen using the Back button (left button).
Noise
Listen-in
Triggers
Activation delay
Triggers
Listen-in
Noise
Activation
Figure 4-34 Setup triggers menu for Baby Phone mode
In case of the “Panic Button” mode one phone number can be defined. In case of the “Voice Call”
mode 10 phone numbers can be defined (see Figure 4-35). In the menu the actual set phone
number is shown (e.g. [phone]). If the phone number is not defined then the “<Enter Nr.>”
line will be displayed in the menu.
Panic Button
Start
Activation time
Autostart
Notifiers
Panic Button
[phone]
Overview
Start
Activation time
Page 32 / 50