User's Manual

AyTerminal User Manual for AyCare
Contents V2.1
4.8.3AyTerminal
This menu provides the common settings for all AyApplications.
Using the:
• ”Info” option allows the user to see FW and AyTerminal useful information. See 4.8.3.3.
• “Default settings” option allows user to reset all AyApplication configurable values to
default.
• “FW Update” option allows user to update the current FW (available only if user registered
to AyServer). See 4.8.3.2.
The currently running AyApplication is marked with a checked radio button. Selecting an
unmarked AyApplication in the menu initiates the change of the current running AyApplication. The
AyTerminal is restarted with the new selected AyApplication. Before restart, a message is shown
for five seconds, see Figure 4-54. . Changing the ayapplication it can take some time (around 3
minutes)..
AyTerminal
<AyApp 4>
<AyApp 3>
<AyApp 2>
<AyApp 1>
AyTerminal
Info
Default settings
FW Update
<AyApp 1>
Figure 4-52 AyApplication menu – standard mode
AyTerminal
<AyApp 1
<AyApp 2
<AyApp 3
AyTerminal
<AyApp 4
Info
Default sett
AyApplicati
Default set
FW Update
<AyApp 1
Figure 4-53 AyApplication menu – jumbo mode
AyApplication
changed.
REBOOTING!
AyApplicati
on
changed.
Figure 4-54 Rebooting message box in standard and JUMBO mode
4.8.3.1Setting the AyApplication to default settings
Selecting the “Default settings” item it is possible to set all settings of the running AyApplication to
theirs default values. A sequence of message screens is shown (see Figure 4-55). The AyTerminal
settings like time and date are not influenced by this action.
Setting to
default… Please
wait.
Setting to
default...Ple
ase wait.
Page 40 / 50