User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
Figure 4-59 Info message – standard and jumbo mode
If the information is not fitting in one screen (one screen has 20 lines in standard and also jumbo
mode) then the text is split in more message boxes. Going from one message box to another is
possible by pressing the OK button.
4.8.4Audio
In “Audio” menu AyTerminal audio settings can be changed.
Checking/ unchecking the “Headset” checkbox item the connected headset is activated or
deactivated.
Volume can be setup for:
• alarm siren
• button clicks
• voice calls
• ring tone
or to
• mute all sound feedback
The volume can be defined in five steps where the first step always means mute (0%, 20%, 40%,
60%, 80% and 100%). By default volume settings for call, siren and ring tone are set to 100% and
for button to 40%.
If the user activates the “Mute all” item, all sound feedback are muted, but the set values are still
stored on the AyTerminal.
For ring tones there is a submenu where the user can additionally choose the ring tone. “Ring tone
3” is set by default.
Audio
Call
Button
Siren
Mute all
Audio
Ring tone
Mute all
Call
Headset
Call
vol.:
25
Figure 4-60 Audio menu – standard mode
Audio
Mute all
Button
Call
Audio
Siren
Ring tone
Headset
Call
vol.:
25
Figure 4-61 Audio menu – jumbo mode
4.8.5Clock
This menu gives the possibility to:
• see current time and date
• set the time and date manually
• activate/deactivate automatic time synchronization with the AyServer
Page 43 / 50